i have 400's in the front and 350's in the back
This is a discussion on Want to lower your car? Look in here!! within the Brakes/Suspension/Chassis forums, part of the W Body Tech category; i have 400's in the front and 350's in the back...
then you're doing something wrong. that should be plenty of spring to go lower.
what are you rubbing on? because you're not bottoming out the struts and running on the bump stops with a 1 finger gap.
It's a hooker with a hammer.
1998 Silvermist GT Coupe - All the N/A couldn't help it...
2003 Blue-Black Metallic GTP Sedan - Thrasher'd -- Watch me lose to an '80's Crapbox!!
2010 Victory Red MPG Machine/Framescraper - LOBALT
Need Help Modding Your 3800??? CLICK ME!!!
I hit the bumpstops probably once every 5-7 miles
2004 Pontiac Grand Prix GTP Comp G - "Panda Superleggera"
2004 Saab 95 Aero Stage 1+
Just stumbled upon this site.
Grand Prix Lowering Springs,Pontiac Grand Prix Lower Springs,Grand Prix Lowering Kits Free Shipping
Jenny, The '99 Silvermist GTP. With the mod's that matter.
I would rather lose by a mile because I built my own car, than lose by an inch, because someone else built it for me. Your car is your story, so don't let someone else write the book.
>>>> http://www.grandprixforums.net/jenny...avy-76250.html
Bilstein Monotube Shock Absorbers and Struts for 2002 PONTIAC GRAND PRIX | AJUSA.com
front bilstein:
- Collapsed Length: 11.67 in / 296.3 mm
- Extended Length: 16.67 in / 423.3 mm
rear bilstein:
- Collapsed Length: 16.94 in / 430.3 mm
- Extended Length: 23.48 in / 596.3 mm
front monroe: Product Details Page
Compressed Length 10.250" Extended Length 16.625"
rear monroe: Product Details Page
Compressed Length 15.500" Extended Length 23.125"
They have less travel, collapsed height isn't as small as stock.
So you end up a little higher.
good call, bud.
so.... i want to go airbags. is it best to buy a whole kit or piece together one? is it pretty much gonna be like $2200 or can it be put together cheaper?
97 gtp- 3.5 pulley, sd headers, autolite 104's, dhp pcm, hai, 180 t-stat
where's the kit you found. because there aren't many.
i saw this one ridetech, airride, airlift, air suspension kits, fbss
97 gtp- 3.5 pulley, sd headers, autolite 104's, dhp pcm, hai, 180 t-stat
i would call and ask on that one. seems like more of a universal kit. i've seen that one before and i'm not sure.
i would assume the UAS kit would be better assembled.
you mean this one?
Complete Air Suspension Kit for Chevy Impala 00-05, Universal Air Suspension
97 gtp- 3.5 pulley, sd headers, autolite 104's, dhp pcm, hai, 180 t-stat
Does anyone know off hand which are the "shortest" struts?
i think koni's are
97 gtp- 3.5 pulley, sd headers, autolite 104's, dhp pcm, hai, 180 t-stat
Hmm...That's good to know.
ok. its official.
i need to do something about my rear fenders.
i'm tired of rubbing on EVERYTHING.
help?
Jenny, The '99 Silvermist GTP. With the mod's that matter.
I would rather lose by a mile because I built my own car, than lose by an inch, because someone else built it for me. Your car is your story, so don't let someone else write the book.
>>>> http://www.grandprixforums.net/jenny...avy-76250.html
Bookmarks