Pontiac Grand Prix Forums : Grandprix
 

Grand Prix Forums is the premier Pontiac Forum on the internet. Registered Users do not see the above ads. Please Register - It's Free!

Pontiac Grand Prix Forum - Welcome Register today! Contact us!

Page 7 of 7 FirstFirst ... 567
Results 121 to 137 of 137
  1. #121
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,500
    Chats
    905

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    ok, sooooo, we may have to make the front SC/IC engine dry sump to fit it under the oem hood...now Al wants to just get the last parts for the Turbo stuff and forego the SC front engine...

    I have finally convinced him that we do need to make the rear powerplant the primary drive unit.... it is after all geared towards Tq as well as the 3.71 fdr.

    damned racecars
    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP

  2. #122
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,500
    Chats
    905

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    well for the 4 master cylinders and steering stuff its nearly 1200$

    but yeah, ultimate brake/throttle control
    4 pedals, custom setup with bias bar on primary pedal/masters. left 2 pedals actuate just f or r brakes masters

    full control for all shenanigans
    4 wheel vented disc brakes.
    4 wheel LS1 dual piston calipers
    4 billet knuckles with dual caliper pattern for both 12" and 11" rotors (aka 11.9 and 10.8 iirc respectively) allowing for F body brakes behind 15" rims and cheaper/larger selection of slicks... with just a rotor and caliper position change.
    custom pedal assembly with bias bar on primary brake pedal (actuating the two primary 1" bore masters tilton 74series)
    as well as two tilton 76 series masters (1" bore) on separate pedals for the flow through masters for just the f or just the r brake apply (think easy f/r burnouts/honing around a roadcourse)

    the throttle pedal is setup with a separate lincage/cam for each OEM 3800 DBW pedal position sensor (each cutdown to just the arm/mount) in this way we can play with the f/r throttle bias over time as well as the "instant wot" switch for launching with the rear engine.

    steering is strange QR wheel with 3/4 shafts and joints to the oem rack 5/8" 36 spline

    still trying to find a deal on the late model MR2 electric PS pump but we may just plumb from the rear engine (now the primary powerplant)
    Last edited by Turbocharged400sbc; 11-25-2016 at 02:49 PM.
    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP

  3. #123
    Turbo is the way to go. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    20,174
    Chats
    80458

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    Fancy.

    SMGPFC Member #1

  4. #124
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,500
    Chats
    905

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    Ketchup
    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP

  5. #125
    SE Level Member Cruisin38's Avatar
    Join Date
    Sep 2015
    Location
    Northern Illinois
    Posts
    115
    Chats
    22

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    My first car was a 93 cutlass supreme 2dr in teal. This thread makes me happy
    My Daily: 2009 Pontiac G6 (G6P Thread) (G6O Thread)
    My Project: 2004 Mazda RX-8 L67 Swap (This Forum) (RX-8 Club) (G6P)
    My Previous: 1993 Cutlass Supreme 3.1

  6. #126
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,500
    Chats
    905

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds



    27.5" tall 295 50 16 mt's....and we can still turn...though not much lol
    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP

  7. #127
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,500
    Chats
    905

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP

  8. #128
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,500
    Chats
    905

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    shortened the arms and did a few things to correct the suspension geometry, we can fit 295's up front though turning radius suffers lol

    upside is the 9* kpi and 7* caster (1" offset axle centerline for additional stability) and SLA give us beautiful camber curve and anti dive/rise that should make corners quite fun. with the 8" crosslaces the scrub radius is 1" positive going to near 0 with the rims widened to 10" (or future wheels)

    being able to move the caliper inboard for the smaller rotors should allow us to get custom 15" rims with 10-12" wide barrels up front and 16" out back along with the greatest selection of relatively cheap 15" slicks for putting down some serious power



    ohhhh yeah...though we really need to widen the crosslaces to 10"

    nice thing about full adjustability is that we can change the flange to flange distance.
    245's give us full turning on crosslaces though im sure the car will look sweet with a rake..
    we can shove 255 mt's on the front since the 295's fit easily out back while we get it running.


    the lack of hood clearance really makes a case for going turbo....though if we drop the engine and trans pan bellow the rails we hope to at least stuff the SS under the steel hood with maybe just cutting the underhood brace....we'll just use more nitrous to make up for the lack of IC with the 2.6


    4wd kicks ass....4wd ride height....nahtsomuch





    it totally looks stock

    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP

  9. #129
    Moderator BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    25,980
    Chats
    92164

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    Stock for sure... but then it's old enough that most don't remember what stock looked like


    2010 Audi A6 Dual IC's

  10. #130
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,500
    Chats
    905

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    hey at least it's lowered over 1.5" from stock
    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP

  11. #131
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,500
    Chats
    905

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    Dual post ic IAT sensors. ..








    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP

  12. #132
    GrandPrix Junkie CrazyGuy03's Avatar
    Join Date
    Jan 2010
    Location
    Buffalo
    Posts
    3,835
    Chats
    7795

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    Jesus....
    2003 Buick Regal GSX lots of mods - click here to see latest build - http://www.grandprixforums.net/threa...ld-for-the-gsx

    *For Reference - Does not have a Zack Howard Cam - It's an Intense Stage 3 - Thank You*

  13. #133
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    36,208
    Chats
    141486

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    i think maybe one more IC is in order here lol

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, 3.0, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned by me. https://goo.gl/gpV5kW

  14. #134
    GrandPrix Junkie CrazyGuy03's Avatar
    Join Date
    Jan 2010
    Location
    Buffalo
    Posts
    3,835
    Chats
    7795

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    Another favorite part of his builds are the attention to details.
    To this day I still want to know all stainless Allen socket head bolts sizes from the rad braces to valve covers to the top of the supercharger etc
    2003 Buick Regal GSX lots of mods - click here to see latest build - http://www.grandprixforums.net/threa...ld-for-the-gsx

    *For Reference - Does not have a Zack Howard Cam - It's an Intense Stage 3 - Thank You*

  15. #135
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,500
    Chats
    905

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    There used to be a bolt thread and size list somewhere? I seem to recall seeing one...
    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP

  16. #136
    Moderator BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    25,980
    Chats
    92164

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    James... there has to have been some progress in the last 4 weeks....


    2010 Audi A6 Dual IC's

  17. #137
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,500
    Chats
    905

    Default Re: Twin Engine Oldsmobile, 4-4-2 much, tribute to the original Hurst "Hairy" Olds

    Yes there's been some progress we did go to the junkyard and pick up some more 4t80e axles as well as more parts and a wiring harness.
    The axles are getting machined for me to shorten them using a coupling sleeve till we get the blanks made for splining.
    I do have the two front knuckle mostly finalized and steel. They may be a bit heavy but they have the full air flow for brake Cooling and to pump the air out from under the car.
    We are a bunch of Rocket surgeons
    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP

Page 7 of 7 FirstFirst ... 567

Similar Threads

  1. Chef's "KILLER" Twin Ladies
    By L36 Killer in forum Members Rides
    Replies: 197
    Last Post: 06-04-2015, 04:57 PM
  2. 2006 Grand Prix "Reduced Engine Power" and "Service Traction System" warnings
    By chadwick in forum General Grand Prix Discussion
    Replies: 31
    Last Post: 10-04-2013, 09:59 PM
  3. Replies: 0
    Last Post: 07-03-2013, 05:30 AM
  4. Replies: 2
    Last Post: 07-21-2012, 08:35 PM
  5. Replies: 6
    Last Post: 12-31-2008, 06:11 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •