Pontiac Grand Prix Forums : Grandprix
 

Grand Prix Forums is the premier Pontiac Forum on the internet. Registered Users do not see the above ads. Please Register - It's Free!

Pontiac Grand Prix Forum - Welcome Register today! Contact us!

Results 1 to 12 of 12
  1. #1
    SE Level Member
    Join Date
    Jul 2014
    Location
    Minnesota
    Posts
    111
    Chats
    2

    Default ZZP PCM and key fob programming

    I am trying to program my key fob and I've done all the steps but it still doesn't work. Would there be any sort of issue with having a ZZP PCM and trying to program fobs?
    00 Black GT - KYB AGXs, Eibach Springs, GMPP Sway bars, Flowmaster 40s, 4500k HID - Totaled
    02 Black GT - KYB GR2s, Eibach Springs, GMPP Sway bars, 4500k HID w/projectors - Seized and Crushed
    00 Red GT - Stock for now

  2. #2
    I live here. stealthee's Avatar
    Join Date
    Mar 2011
    Location
    SWPA
    Posts
    8,818
    Chats
    33

    Default Re: ZZP PCM and key fob programming

    PCM has nothing to do with the FOB.
    2011 Mitsubishi Lancer GTS - Stock DD mode
    1994 Dodge Stealth - Currently being revived. Modded

  3. #3
    Donating Users Swiggles's Avatar
    Join Date
    May 2009
    Location
    Quincy, Mass
    Posts
    2,170
    Chats
    1847

    Default Re: ZZP PCM and key fob programming

    Thereís 2 different keyless modules, you have to have the right fob for the right module

    No more GP 04 Impala SS Indy:
    Gen V 3.6|FWI|N* TB lq4 MAF|1.8 Rockers|F&R Plogs|ZZP 3" Catted DP|ZZP 2.5" Catback|

  4. #4
    SE Level Member
    Join Date
    Jul 2014
    Location
    Minnesota
    Posts
    111
    Chats
    2

    Default Re: ZZP PCM and key fob programming

    How do I know what fob and Module I have /need?
    00 Black GT - KYB AGXs, Eibach Springs, GMPP Sway bars, Flowmaster 40s, 4500k HID - Totaled
    02 Black GT - KYB GR2s, Eibach Springs, GMPP Sway bars, 4500k HID w/projectors - Seized and Crushed
    00 Red GT - Stock for now

  5. #5
    Donating Users Swiggles's Avatar
    Join Date
    May 2009
    Location
    Quincy, Mass
    Posts
    2,170
    Chats
    1847

    Default ZZP PCM and key fob programming

    The module is behind the dic. Thereís a module A and a module B if I remember right. If you have your original key fob the part number is on the back. Iím not sure what numbers go with what module.

    Are you trying to reprogram your original fob after installing a zzp pcm?

    Make sure the battery in the fob isnít dead, that should probably be the first thing to check.

    No more GP 04 Impala SS Indy:
    Gen V 3.6|FWI|N* TB lq4 MAF|1.8 Rockers|F&R Plogs|ZZP 3" Catted DP|ZZP 2.5" Catback|

  6. #6
    SE Level Member
    Join Date
    Jul 2014
    Location
    Minnesota
    Posts
    111
    Chats
    2

    Default Re: ZZP PCM and key fob programming

    Well since I bought the car back in 2014 the key fob has never worked. I've replaced batteries with no luck, so I just haven't used it. I recently came across the thread on here about reprogramming the fob, so that's why I've been trying recently, Yes I just replaced the battery on Saturday.
    00 Black GT - KYB AGXs, Eibach Springs, GMPP Sway bars, Flowmaster 40s, 4500k HID - Totaled
    02 Black GT - KYB GR2s, Eibach Springs, GMPP Sway bars, 4500k HID w/projectors - Seized and Crushed
    00 Red GT - Stock for now

  7. #7
    GTP Level Member
    Join Date
    Jun 2016
    Location
    Cleveland ohio
    Posts
    664
    Chats
    124

    Default Re: ZZP PCM and key fob programming

    More than likely the arm that holds the battery is broken. I have soldered a few in the past and they worked until I bought some more off of ebay.
    2007 Grand Prix GT. Pacesetter headers, 1.8 roller rockers, CAI, HPTuned, 3.4pulley, TEP transmission, DIY ported heads, 90# springs, rollmaster single timing chain, fuel pump rewire, poly mounts/performance suspension, Impala front brakes drilled and slotted rotors.
    Past Grand Prix- 97 GT, 03 GT, 04 GT, 04 Comp G.

  8. #8
    I live here. stealthee's Avatar
    Join Date
    Mar 2011
    Location
    SWPA
    Posts
    8,818
    Chats
    33

    Default Re: ZZP PCM and key fob programming

    Agreed that is a big problem. I soldered mine when it happened to it. The other issue that happens is the buttons wear out and don't make good contact.
    2011 Mitsubishi Lancer GTS - Stock DD mode
    1994 Dodge Stealth - Currently being revived. Modded

  9. #9
    GT Level Member
    Join Date
    Sep 2015
    Location
    Cheyenne, WY
    Posts
    291
    Chats
    17

    Default Re: ZZP PCM and key fob programming

    I had received 2 fobs with my car, neither one worked.
    New battery & solder connections looked good.
    I glued pieces of tin foil to the pads & got them both working.
    2007 Antique Bronze Metalic Grand Prix GT...bone stock.

  10. #10
    SE Level Member
    Join Date
    Jul 2014
    Location
    Minnesota
    Posts
    111
    Chats
    2

    Default Re: ZZP PCM and key fob programming

    Can you still get these fobs from a dealer?
    00 Black GT - KYB AGXs, Eibach Springs, GMPP Sway bars, Flowmaster 40s, 4500k HID - Totaled
    02 Black GT - KYB GR2s, Eibach Springs, GMPP Sway bars, 4500k HID w/projectors - Seized and Crushed
    00 Red GT - Stock for now

  11. #11
    GT Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    400
    Chats
    33

    Default Re: ZZP PCM and key fob programming

    Yes but don't throw your money away like that. I've bought the ones off Amazon and they work just as well. Sure the ebay ones are good too

  12. #12
    SE Level Member
    Join Date
    Jul 2014
    Location
    Minnesota
    Posts
    111
    Chats
    2

    Default Re: ZZP PCM and key fob programming

    Battery contacts were broken
    00 Black GT - KYB AGXs, Eibach Springs, GMPP Sway bars, Flowmaster 40s, 4500k HID - Totaled
    02 Black GT - KYB GR2s, Eibach Springs, GMPP Sway bars, 4500k HID w/projectors - Seized and Crushed
    00 Red GT - Stock for now

Similar Threads

  1. Programming a Key Fob
    By the70judge in forum Introductions/Noob Questions
    Replies: 7
    Last Post: 09-09-2016, 12:58 PM
  2. Programming BCM
    By MyHero in forum General Tech Discussion
    Replies: 13
    Last Post: 02-02-2016, 08:16 PM
  3. Programming a fob
    By Angelo1912 in forum General Tech Discussion
    Replies: 8
    Last Post: 08-13-2012, 10:57 AM
  4. programming key fob?
    By gtp239 in forum General Tech Discussion
    Replies: 0
    Last Post: 01-31-2011, 06:24 PM
  5. PCM programming
    By tdm571 in forum General Tech Discussion
    Replies: 3
    Last Post: 12-10-2010, 09:16 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •