Pontiac Grand Prix Forums : Grandprix
 

Grand Prix Forums is the premier Pontiac Forum on the internet. Registered Users do not see the above ads. Please Register - It's Free!

Pontiac Grand Prix Forum - Welcome Register today! Contact us!

Page 2 of 4 FirstFirst 1234 LastLast
Results 21 to 40 of 62
  1. #21
    GTP Level Member speed demon's Avatar
    Join Date
    Apr 2011
    Location
    MICHIGAN
    Posts
    676
    Chats
    28

    Default Re: 98 black coupe

    I want the push start out of the red prix!
    '01 GTP: Rebuilt Trans by Andrew S....300m,hardened 4th,Transgo shift kit,V8 chain ect ect,3.8 MPS,ZZP 10.5.....More to come!

  2. #22
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,115
    Chats
    159

    Default Re: 98 black coupe

    Some updates:

    Had to fabricate a custom downpipe for th pacesetters. I'm going to get them mocked up this weekend and mark them to make them a 2 piece header similar to zzp.

    I also finished up the ported blower and I'm waiting on a northstar throttle body and Lq4 maf.

    I have to tune dialed in as well, 6400 rpm shifts into 2nd and 3rd and 6100 into 4th I also managed to dial in pe, basically 0s while in pe everytime.

    Made it to the track and managed a 12.68 at 108 with a 1.9 60ft. The cable mod helped a lot with the traction. Once the headers and ported blower go on I'll probably drop to a 2.7 or 2.6 and go from there.
    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106

  3. #23
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,115
    Chats
    159

    Default Re: 98 black coupe

    Pacesetters are welded up into a two piece header. I also got the ported Gen 3 installed. It took a couple pulls to get pe dialed in at 0 again but all is well. The header flanges did need to be ground down in a few spots to avoid hitting the head studs. No leaks though which is nice.

    Idle clip open header
    http://https://youtu.be/QCkDOwJCvwc
    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106

  4. #24
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,115
    Chats
    159

    Default Re: 98 black coupe

    Pacesetters are welded up into a two piece header. I also got the ported Gen 3 installed. It took a couple pulls to get pe dialed in at 0 again but all is well. The header flanges did need to be ground down in a few spots to avoid hitting the head studs. No leaks though which is nice.

    Idle clip open header
    http://https://youtu.be/QCkDOwJCvwc
    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106

  5. #25
    SE Level Member smg267's Avatar
    Join Date
    Apr 2016
    Location
    killadelphia
    Posts
    106
    Chats
    0

    Default Re: 98 black coupe

    Fixed your link. Solid work!

    https://youtu.be/QCkDOwJCvwc

  6. #26
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,115
    Chats
    159

    Default Re: 98 black coupe

    Quote Originally Posted by smg267 View Post
    Fixed your link. Solid work!

    https://youtu.be/QCkDOwJCvwc
    Thanks lol
    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106

  7. #27
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,115
    Chats
    159

    Default Re: 98 black coupe deeper 12s attained

    Added even more power.

    I installed a northstar on my ported Gen 3 then installed a fsic
    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106

  8. #28
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,172
    Chats
    31858

    Default Re: 98 black coupe deeper 12s attained

    I didn't realize you could drop to such a small pulley with basically just an NIC cam. Awesome. any pictures of the intercooler install?

  9. #29
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,115
    Chats
    159

    Default Re: 98 black coupe deeper 12s attained

    There were people running 12s on just a nic cam, Gen v, togs, and a 3.0 pulley. It's not just a show cam. I have to upload some pictures later.
    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106

  10. #30
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,115
    Chats
    159

    Default Re: 98 black coupe deeper 12s attained

    Header install


    Northstar install


    Intercooler install



    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106

  11. #31
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    37,741
    Chats
    157246

    Default Re: 98 black coupe deeper 12s attained

    nice install. and a non buck tooth too.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, 2.8, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW

  12. #32
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,172
    Chats
    31858

    Default Re: 98 black coupe deeper 12s attained

    Very nice, impressive numbers

  13. #33
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,115
    Chats
    159

    Default Re: 98 black coupe deeper 12s attained

    I'd like to see some low 12s or high 11s now lol
    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106

  14. #34
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,172
    Chats
    31858

    Default Re: 98 black coupe deeper 12s attained

    this gives me hope, maybe someday when I learn to drive my car will be fast enough to run a 12. on a 2.6 pulley now with an XP cam, ported heads and a methanol injection kit.

  15. #35
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,115
    Chats
    159

    Default Re: 98 black coupe deeper 12s attained

    Anyone care to guess whp/trq before I get her dynod?
    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106

  16. #36
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,115
    Chats
    159

    Default Re: 98 black coupe deeper 12s attained

    Anyone care to guess whp/trq before I get her dynod?
    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106

  17. #37
    I live here. Below Average Joe's Avatar
    Join Date
    Aug 2011
    Location
    'Merica
    Posts
    7,367
    Chats
    22776

    Default Re: 98 black coupe deeper 12s attained

    Oh bout' tree fitty.....
    Quote Originally Posted by Sven The Sexman View Post
    Bill had a major role in all of the Star Wars movies; he was the force.

  18. #38
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,115
    Chats
    159

    Default Re: 98 black coupe deeper 12s attained

    Quote Originally Posted by Below Average Joe View Post
    Oh bout' tree fitty.....
    Dammit, monster, I ain't givin you no treefiddy.
    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106

  19. #39
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,115
    Chats
    159

    Default Re: 98 black coupe deeper 12s attained

    Well it makes the power for 11s. Now I have to figure out weight reduction, slicks, rear suspension, add a degree or two of timing, etc.
    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106

  20. #40
    Regal GS Level Member BoostedPontiac's Avatar
    Join Date
    Apr 2014
    Location
    South Haven, MI
    Posts
    1,115
    Chats
    159

    Default Re: 98 black coupe deeper 12s attained

    Yay baby pulley

    98' GP coupe NIC Pacesetters, E85, FSIC, 2.6, heads, blah
    11.82 @ 118.4 with a 1.8 60ft
    Retired: 99' Regal GS Turbo 11.428 @ 122.61 1.7 60ft.
    Retired: 99 GTP top swap nic setup. 13.37@106

Page 2 of 4 FirstFirst 1234 LastLast

Similar Threads

  1. BoostedPontiac's 99 GTP Rising from the ashes?
    By BoostedPontiac in forum Members Rides
    Replies: 197
    Last Post: 03-09-2016, 01:16 AM
  2. Boostedpontiac's Part Out(Issues resolved, All parts sold)
    By BoostedPontiac in forum For Sale - Parts
    Replies: 60
    Last Post: 08-11-2015, 05:40 PM
  3. HELP... My car has a weird SMELL if floored/boosted??
    By hcokiid18 in forum General Tech Discussion
    Replies: 44
    Last Post: 06-02-2011, 10:21 PM
  4. 98 daytona 500 boosts but flutters when boosted
    By mikedinthecity in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 2
    Last Post: 07-11-2010, 04:30 AM
  5. Put a boosted 99 Civic si to shame
    By Bogers99GTP in forum Track Sessions and Kills
    Replies: 12
    Last Post: 10-18-2008, 01:58 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •