Edit: My goals for this build are 11s with the nic cam. Once I hit that, I'll be going turbo again. To my knowledge and rigorous forums research, I have seen no nic cars in the 11s but a few very close. I know Steve Hickman was close with a 12.11 until his airbags went off on the track.
8.5:1 JE forged pistons .020 over
Arp head and main studs
90# springs and stock timing set
Ported lim and heads
3" zzp exhaust
Aeromotive 340 stealth pump
23* of timing wot with no kr
Parts I need:
Rollmaster double roller
Ported Gen 3/ Gen v
Possibly an intercooler
This car has already ran a 12.8 with a 2.1 60ft. I'm hoping to pick up an aluminum subframe, Aztec aluminum bumper supports, a manual drivers seat, and some other light weight fun stuff. I figure if i drop a couple hundred pounds and drop the 60 ft to 1.7 ish, it should be mid 12s or so.
I just picked up a rust free 98 black coupe. It needs a bit of body work from an accident but, it drives smooth and straight. This will be my new build thread. The cars already had a bit done to it like e85, nic cam, 2.8 pulley, and a full exhaust. 0 kr BTW so that's nice. I'll have to upload a few pictures later. I do have an idle clip though.