Pontiac Grand Prix Forums : Grandprix
 

Grand Prix Forums is the premier Pontiac Forum on the internet. Registered Users do not see the above ads. Please Register - It's Free!

Pontiac Grand Prix Forum - Welcome Register today! Contact us!

Results 1 to 8 of 8
  1. #1
    SE Level Member
    Join Date
    Jun 2016
    Location
    Broomfield, CO
    Posts
    9
    Chats
    0

    Default Tuner in Denver area?

    Any recommendation for a tune shop in the Denver area that knows these cars?

  2. #2
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    37,466
    Chats
    154835

    Default Re: Tuner in Denver area?

    you be best to get a canned tune from overkill. and stay the hell away from that guy zack on FB in CO. hes a hack.

    or buy a tuner and learn to tune it your self. be the best way to go in the long run.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, 2.8, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW

  3. #3
    SE Level Member 01Blackgtp's Avatar
    Join Date
    May 2014
    Location
    Colorado
    Posts
    114
    Chats
    0

    Default Re: Tuner in Denver area?

    Greg over at finish line fine tuned my "I have no idea what i'm doing.jpg" rookie tune on their dyno. Was kinda spendy iirc though. like $150 an hour on the dyno. We squeezed it from a 284 pig rich baseline, to a 303 fwhp with a failing rear 02 over the course of about 3 hours.


    I have an HP tuner about 40 minutes north of you. And I have default can tunes from I think all the PCM companies. I charge approximately 1 beer an hour, however the tune quality goes down after hour 6.
    I think it costs like $50 for the "credit" to unlock a single car from HP, $100 for a whole year of the same car. I also have most Sundays free.



    What mods are you tuning for?

  4. #4
    SE Level Member
    Join Date
    Apr 2017
    Location
    Colorado
    Posts
    1
    Chats
    0

    Default Re: Tuner in Denver area?

    So ive been looking into getting a tune for my 07 GT. S/C of course, im running stock pulley and wanna drop down to a 3.6 or 3.5. I was looking into getting an Intense PCM since i can't find anyone for a tune. Also was looking into getting 1.9 rockers with a set of lifters. Any help would be nice.
    ZZP P Log
    ZZP 3in Down Pipe
    3in Cone Intake
    New Wires and Plugs
    180 Degree Thermostat

  5. #5
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    37,466
    Chats
    154835

    Default Re: Tuner in Denver area?

    pretty sure the 07 is not tune able.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, 2.8, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW

  6. #6
    SE Level Member
    Join Date
    May 2017
    Location
    Denver
    Posts
    3
    Chats
    0

    Default Re: Tuner in Denver area?

    Will at Overkill says he can tune a 2007.

    http://www.getoverkilled.ca

  7. #7
    GrandPrix Junkie spazzz's Avatar
    Join Date
    Nov 2012
    Location
    Madison
    Posts
    3,266
    Chats
    0

    Default Re: Tuner in Denver area?

    Quote Originally Posted by 01Blackgtp View Post



    I have an HP tuner about 40 minutes north of you. And I have default can tunes from I think all the PCM companies. I charge approximately 1 beer an hour, however the tune quality goes down after hour 6.



    That is some funny $hit right there.

  8. #8
    SE Level Member
    Join Date
    Jun 2016
    Location
    Broomfield, CO
    Posts
    9
    Chats
    0

    Default Re: Tuner in Denver area?

    I missed all the replies to this, sorry for not responding!

    I ended up buying HPTuner and canned tune from overkill.

    Mods are currently:
    3" ZZP downpipe
    Intense FWI
    AL104s
    180Tstat
    3.6 pulley
    Shiftkit
    Trans cooler

    Oh and prior to any mods, I had it dyno'd at finish line at one of their dyno days last summer- it made 208whp/224tq completely stock, 97K miles, and the cat was going. I hope to make to their next dynoday event to see what it does now.

Similar Threads

  1. Anyone in Denver, CO with HP tuner?
    By glanzergtx in forum West
    Replies: 0
    Last Post: 08-18-2014, 04:26 PM
  2. New GT Owner from the Lincolnton/Denver, NC Area
    By Seurehkt in forum Introductions/Noob Questions
    Replies: 5
    Last Post: 06-02-2014, 07:56 PM
  3. Anyone in the Denver area that can help me fix this broken motor?
    By aimhigh86 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 3
    Last Post: 05-30-2013, 03:15 PM
  4. tuner in denver?
    By riceburner in forum West
    Replies: 35
    Last Post: 12-21-2009, 10:46 PM
  5. Colorado Springs/Denver area
    By DesQ27 in forum Introductions/Noob Questions
    Replies: 18
    Last Post: 08-11-2009, 08:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •