Pontiac Grand Prix Forums : Grandprix
 

Grand Prix Forums is the premier Pontiac Forum on the internet. Registered Users do not see the above ads. Please Register - It's Free!

Pontiac Grand Prix Forum - Welcome Register today! Contact us!

Results 1 to 13 of 13
  1. #1
    SS-DD Level Member IndeedSS's Avatar
    Join Date
    Dec 2007
    Location
    St Louis MO
    Posts
    1,900
    Chats
    0

    Default people with dyno sheets

    I don't really care about how much HP, but am looking for your powerband. Please list any applicable mods (cam, heads, headers etc) and where you are hitting peak HP. I realize there are going to be differences based on the mod level but it would be interesting to see the powerband. If you have your dyno sheet that would be great as well.
    04 Indy SS build #972 - Traded
    2010 Camaro SS LS3

  2. #2
    Super Moderator UR LOSN's Avatar
    Join Date
    Dec 2007
    Location
    Rockford, IL
    Posts
    5,797
    Chats
    23

    Default Re: people with dyno sheets



    I had a few spikes here and there.....LOL


    sorry, couldnt resist.....

    ok, back on topic
    2001 GTP- PT76 turbo, Intense Drag cars old engine, Stage 4 Intense turbo cam,FMIC,150 wet,Double roller timing chain,Diamond forged coated pistons 8:0:1,Diamond piston rings,Cryoed L32 connecting rods,Cryoed crank,Clevite77 main bearings,Clevite77 cam bearings,Clevite77 L32 rod bearings,ARP Everything, Intense/meizere true billet Flexplate,Intense Wilson UIM/LIM,Intense oil pressure kit,Cometic,OE-R lifters,Cryoed L67 block,ATI turbo dampner,80# inject,Weldon 2035 fp,Aero Fuel Rails,AL cradle

  3. #3
    SS-DD Level Member IndeedSS's Avatar
    Join Date
    Dec 2007
    Location
    St Louis MO
    Posts
    1,900
    Chats
    0

    Default Re: people with dyno sheets

    daewoo FTL
    04 Indy SS build #972 - Traded
    2010 Camaro SS LS3

  4. #4
    GT Level Member bayareagtp's Avatar
    Join Date
    Dec 2007
    Location
    Milpitas , Ca.
    Posts
    270
    Chats
    0

    Default Re: people with dyno sheets

    great dyno sheet ! LOL .
    1998 GTP , 3" down pipe w/cat , u-bend delete , full 3" exhaust w/ magnaflows , no resonator , powerslot front rotors , Overkill PCM , Overkill FWI , 180* t-stat , 1* colder plugs , alt. re-wire , alt. stage 1 booster . 215 whp and 238 torque .

  5. #5
    SS-DD Level Member IndeedSS's Avatar
    Join Date
    Dec 2007
    Location
    St Louis MO
    Posts
    1,900
    Chats
    0

    Default Re: people with dyno sheets

    ok it was fun but time to quite taking a dump in my thread. and that goes for me too.

    On topic, the couple of posted dyno results I've seen all have tq max at 3000-4000 and HP from 5200-5800 rpm. Mods not available.
    04 Indy SS build #972 - Traded
    2010 Camaro SS LS3

  6. #6
    SE Level Member x1FastGTPx's Avatar
    Join Date
    Jan 2008
    Location
    Downers Grove
    Posts
    68
    Chats
    0

    Default Re: people with dyno sheets


  7. #7
    SE Level Member
    Join Date
    Jan 2008
    Posts
    131
    Chats
    0

    Default Re: people with dyno sheets

    With that graph, I hope you're running 3.69's or better in the trans!

    Edit:
    Did some quick calculations, and you need more like a 4 series gear to take advantage.
    With 3.69's
    1st shifting at 6604 @ 45 mph
    2nd starts at 3544 rpms (graph doesn't go that low, but around 150hp) shift at 6300 (80mph_
    3rd starts at 4019 rpms (170ish hp) probably roll through the traps at 120 (450ish hp)

    Our transmissions are set-up for a broader TQ band, you may need to see if you gan change the internal gearing to a shorter gear to take full advantage of where your power is.
    Last edited by Ron Vogel; 01-16-2008 at 02:16 PM.

  8. #8
    SE Level Member scooz14's Avatar
    Join Date
    Jan 2008
    Location
    West Bloomfield MI
    Posts
    115
    Chats
    0

    Default Re: people with dyno sheets

    there is no way your curve came out that smooth. that has def has some massaging done to it.
    12.591@108.00 1.95 60'
    329.9hp 400.1tq
    http://www.mccgp.com/member_details.php?mid=95

  9. #9
    GT Level Member Meemperor's Avatar
    Join Date
    Jan 2008
    Location
    Toronto, ON, Canada
    Posts
    209
    Chats
    0

    Default Re: people with dyno sheets



    04 Comp G, L26, Ported Heads(stock vavles), Comp cams 130# vavle springs, XP cam, Cartuning Turbo T-66, Intercooled, 3" downpipe. 12.5 PSI
    Lumpy Gen 3

  10. #10
    Super Moderator UR LOSN's Avatar
    Join Date
    Dec 2007
    Location
    Rockford, IL
    Posts
    5,797
    Chats
    23

    Default Re: people with dyno sheets

    shawn, notice your AFR at the bottom of the sheet. kinda lean as well....some levels avove 12.0. with that much boost...you should see some knock, and that would show a dent in that graph up top. I have never seen a pull THAT smooth either......
    2001 GTP- PT76 turbo, Intense Drag cars old engine, Stage 4 Intense turbo cam,FMIC,150 wet,Double roller timing chain,Diamond forged coated pistons 8:0:1,Diamond piston rings,Cryoed L32 connecting rods,Cryoed crank,Clevite77 main bearings,Clevite77 cam bearings,Clevite77 L32 rod bearings,ARP Everything, Intense/meizere true billet Flexplate,Intense Wilson UIM/LIM,Intense oil pressure kit,Cometic,OE-R lifters,Cryoed L67 block,ATI turbo dampner,80# inject,Weldon 2035 fp,Aero Fuel Rails,AL cradle

  11. #11
    SS-DD Level Member IndeedSS's Avatar
    Join Date
    Dec 2007
    Location
    St Louis MO
    Posts
    1,900
    Chats
    0

    Default Re: people with dyno sheets

    Thanks guys keep them coming. If you have access to others those would be great as long a partial mod list is available.
    04 Indy SS build #972 - Traded
    2010 Camaro SS LS3

  12. #12
    SE Level Member
    Join Date
    Jan 2008
    Posts
    131
    Chats
    0

    Default Re: people with dyno sheets

    Quote Originally Posted by Meemperor View Post


    04 Comp G, L26, Ported Heads(stock vavles), Comp cams 130# vavle springs, XP cam, Cartuning Turbo T-66, Intercooled, 3" downpipe. 12.5 PSI
    Now that's what I'm talking about! I am looking for similar numbers, but peaking a shade earlier.

  13. #13
    GT Level Member Meemperor's Avatar
    Join Date
    Jan 2008
    Location
    Toronto, ON, Canada
    Posts
    209
    Chats
    0

    Default Re: people with dyno sheets

    Quote Originally Posted by Ron Vogel View Post
    Now that's what I'm talking about! I am looking for similar numbers, but peaking a shade earlier.
    Wait until it's at 20+ psi in the spring. 13psi is winter mode.

    550whp is the goal I think, for the XP cam.

    PS. That's my buddies car (With my heads studs, Gaskets, valve springs, seals ... and a bunch of other stuff lol !)
    Lumpy Gen 3

Similar Threads

  1. where are the MI people???
    By whitcomb in forum Midwest
    Replies: 197
    Last Post: 11-28-2011, 09:24 PM
  2. People who should know better
    By mlambert in forum The Rant Forum
    Replies: 24
    Last Post: 02-07-2008, 10:14 PM
  3. Dyno anyone?
    By SD GTP in forum Northeast
    Replies: 10
    Last Post: 01-12-2008, 02:09 PM
  4. 1HP Turbo Dyno Video
    By John02Hawk in forum Off Topic Discussion
    Replies: 8
    Last Post: 12-30-2007, 03:39 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •