Does anyone know how the glossy clear black looks on the tails? I don't want my tails to be ugly or matte.
This is a discussion on The Super Duper Plasti Dip Thread within the How To Write-Ups/Tech Tips forums, part of the W Body Tech category; Does anyone know how the glossy clear black looks on the tails? I don't want my tails to be ugly ...
Does anyone know how the glossy clear black looks on the tails? I don't want my tails to be ugly or matte.
Out with the old. In with the supercharged.
i dont think you want to plastidip your tails...
vht nightshade works well for that.
1995 SE. CAI.
"Racing is life. Anything that happens before or after is just waiting."
Steve McQueen
Yeah, but The point of the plasti dip is I'll easily be able to remove it.
Out with the old. In with the supercharged.
and to awnser the question on my pd multiple times?
because if there is a tear in the pd "like a chip in the paint"
then you just throw on another coat
Some People Make Planes
'03 Buick Park Avenue Ultra - Intense FWI, DDM HID Hi/Lo, 30% tint
www.TheChicagoGarage.org
Plastidip now has a shading spray, assuming it just peels off as well.
00 GTP Daytona
i have alloy wheels and i was considering doing this but if i wanted to remove the stuff whats the easiest way with minimum effort? rub some gas on the rim? or brake clean?
99 GTP - Open Cone, ZZP STB ,GMPP Front & Rear Sway Bar, 3" DP & Cat-Back, Built Trans, 12'' Brakes, Tune
http://www.grandprixforums.net/gtp-t...ack-67489.html
04 SRT4 - Bone Stock....For Now
depends on the design of the rim. if it's a 5 spoke then just peeling
Some People Make Planes
I have the stock 8 spoke wheels that come on a 04+ GP
99 GTP - Open Cone, ZZP STB ,GMPP Front & Rear Sway Bar, 3" DP & Cat-Back, Built Trans, 12'' Brakes, Tune
http://www.grandprixforums.net/gtp-t...ack-67489.html
04 SRT4 - Bone Stock....For Now
Pics?
J think I know the wheel and peeling the face of the wheel will be easy. But the sides will be harder. But with the sides back ot will loon a little better Imho as the wheel gets depth
Some People Make Planes
99 GTP - Open Cone, ZZP STB ,GMPP Front & Rear Sway Bar, 3" DP & Cat-Back, Built Trans, 12'' Brakes, Tune
http://www.grandprixforums.net/gtp-t...ack-67489.html
04 SRT4 - Bone Stock....For Now
there just a alloy finish not polished or chrome so how would i remove plasti dip from them with out ruining the finish?
99 GTP - Open Cone, ZZP STB ,GMPP Front & Rear Sway Bar, 3" DP & Cat-Back, Built Trans, 12'' Brakes, Tune
http://www.grandprixforums.net/gtp-t...ack-67489.html
04 SRT4 - Bone Stock....For Now
It will come up. You can peel it off a dried sponge if the Pd was thick enough.
Some People Make Planes
them wheels are gonna look real nice with the plasti dip on it, and yea that stuff just comes right off no damage to the wheels or anything
HV3/SLP Mufflers/K&N Air Intake
05 N/A
http://www.grandprixforums.net/my-bl...-gt-59405.html - my car
thanks i think so too
99 GTP - Open Cone, ZZP STB ,GMPP Front & Rear Sway Bar, 3" DP & Cat-Back, Built Trans, 12'' Brakes, Tune
http://www.grandprixforums.net/gtp-t...ack-67489.html
04 SRT4 - Bone Stock....For Now
before:
after:
![]()
HV3/SLP Mufflers/K&N Air Intake
05 N/A
http://www.grandprixforums.net/my-bl...-gt-59405.html - my car
Bookmarks