Simple Intake (pictures)

This is what I did. 4" pipe and K&N filter

So what do I have to do to the air box?

Remove it?

Burn it

Give it to a homeless person.

Hurrrrrrr

Well I haven't even looked at it yet. how do I take it off?

If you cant figure that out by yourself then...... i mean.........

well I havent looked at it yet so im not retarded lol. obviously it must be really easy

yes yes too easy. Just take a look at it when you get a chance and if you have any problems, come back here.

But don't because we'll probably make fun of you.

Its supermegagrandprixfriendsclub easy.

How long is the filter in the original "How To with Pictures"??

And sorry if this is already answered, i didnt look through all 12 pages of this thread. Only the first 5...

I think 9in.

But anything 5-9in will work.

That's what she said

Cone on filter, yay...blower gets louder.

Been a long time since I was on here, but have been scouting the site lately as I recently picked up a '99 GTP with 180,000km. Thanks for the how-to nawarkk, I used a K&N RU-1785 3.5x5x8.5" straight filter for mine, and man does the supercharger scream, absolutely love it.

I'm thinking I'm going to need to pick up a new piece of PVC though, I bought one like yours, 3" with the small OD on the one side, however it seems the wall thickness on mine is a little thinner - the heat from the engine and the forces from the clamp seem to have turned it into an egg shape and the clamp had loosened off a little bit. I wonder has anyone else suffered from this problem? My engine temperature floats around the 85-90*C mark (185-194*F), which seems normal to me - granted I'm also using the boost a lot (really enjoying the car, lol) so I'm sure the supercharger is packing a heck of a lot more heat under the hood as well.

Ok so can someone explain to me exactly what i should do with my pcm? Or link me somewhere that will? I have a 97 GTP.

zip tie it down.

Down to what?

Down to the car...
I used zip ties and some velcro for extra safety. Some people don't even use zip ties.
I would have to look at mine but I'm pretty sure there were holes somewhere close that I ran the zip ties thru and around the pcm. I've had no issues.