post up your audio equipment

I would've loved if I coulda just used that, I tried it on my 80 lb box... Couldn't withstand my jackrabbit starts haha

New build for the 15'' SMD going on, peek,


lil' re-build log SMD in a Grand Prix - SMD Forum

^^ Nice work Chris

Everyone has really nice set-ups. Mine is more power than looks lol, I keep planning to clean it up. The wires under the car are now in heavy duty black conduit, not the crappy blue, and the are routed better.

I have 2 RE Audio XXX 12's
2 Hifonics 2600 Watt Amps
Panasonic DVD Head Unit
3 Car Audio Batteries
4 Runs of 0 guage wire ran under car
350 Amp Alternator
Big 3 done
Each amp had dual 0 guage inputs for positive and ground

Alpine cda-7892
fosgate fnx 4" mids
fosgate tweets
oz audio matrix xovers
Dianomd audio d391i 6x9s
Fi Q 18 D2 w/ BP (older model) 4.2 cuft sealed with polyfil
mmats dhcx2200.1
kicker zx350.4
yellow top

Nothing serious but gets plenty loud and sounds AWSOME!! :-)


Hoping the 18 breaks so i can have it reconed to a 15 and go ported!!! Haha. Funny thing is the sub gets hotter than the amp!!! Even on hot days.... God i love mmats!!

i have a sundown audio 15 v1 1500 rms and a rd audio 1750l.1 at .5 ohm putting out 2500 rms . front stage is 2 selenium 6 inch speakers 100 rms each pro audio speakers . yellow top in the front and group 31 yellow top in the trunk. car has big 3 and 0 guage thru out . no sound dedener yet . should do high 140s to low 50s

your not going to hit a 150, shouldn't with that set up (SA-15 or Z or NS) another side note, wired at .5 yes seeing .5 power no... i'm wired at 1 (.5 per amp) usually rise to 2.3-2.7

no sub tho, just a monsoon amp (stock)

it can burp a 150 easy its been done thats what that woofer is for my box is tuned for spl but its good for both . im not going to burp but it will be high 40s forsure . and its one double the power but i have seen them take all the way up to a 10k burp they can take it likea champ !

15'' SMD on a SAZ3500 @ .35 ohms... Done! It HERTZ!!!

Enuf trunk room left for my other MB Q 4.80, my MB Q 4.125, probably more batts and put the mid amp rack on top.

It's done, an "Ascendant Audio" SMD (with a fresh dual .7 recone done by Nick Morgan, that's his signature on it), on a SAZ3500D, yes it's running at .35 ohms!
not much rise with the double layered birch box reinforced with threaded rods, 45's in all the corners, adjustable frequency, from 40-29htz...

now post up some numbers..

My Setups effect on the mirrors after some tweaking.
my phone is 1080p at 30 fps lol

i have a cheap double din radio and 2 kicker 15 inch comp vr in mine sorry for ****ty cam was a cell phone and i was driving lol VIDEO0013 - YouTube

Originally Posted by chrishova

It's done, an "Ascendant Audio" SMD (with a fresh dual .7 recone done by Nick Morgan, that's his signature on it), on a SAZ3500D, yes it's running at .35 ohms!
not much rise with the double layered birch box reinforced with threaded rods, 45's in all the corners, adjustable frequency, from 40-29htz...

I'm getting another amp, the woofer can take the SAZ3500 @ .35 ohm, the Epic 160 and the HU all the way up, so this DDz2 amp was clamped at 7700w at 1.8 ohms..

Get the NS.1 Chris, or get another 3500 and strap them

Originally Posted by 1LoudGrandPrix

Get the NS.1 Chris, or get another 3500 and strap them

I am getting this DDz2 for the low!!!! I will be trading again soon! The DDz2 did 7700w clamped at 1.8 ohms, so that's about right! I can run it at 1.4 ohms (I have a D.7) but I would like to try it at .35! Ty said it can do it if have the electrical! The DD will do 13,000w at 16v! I do like the NS-1! It will be about the same wattage. I don't wanna strap amps so I can change ohms quickly. Even though I've been at .35 ohms since the week after I put it in, lol

I always say if you need more than one you just ain't doing it right.

IMG_20120806_095955.jpg picture by beelzeboul - Photobucket

1 orion comp dual voice coil
1 2700watt Hi Fonics Amp
Rhino Lined and coated custom box built to spec
touchscreen droid coming soon mainly for torque pro app but figure the touch screen for music is always ballin

But the SMD could take a SAZ3500 on each coil, I was thinking about that!