I am getting new muffs next week so ill have to post it up t see what ya'll think
This is a discussion on Official: Grand Prix Exhaust clip thread. within the Engine forums, part of the W Body Tech category; I am getting new muffs next week so ill have to post it up t see what ya'll think...
I am getting new muffs next week so ill have to post it up t see what ya'll think
'01 GP GT Topswap GT
'95 GP GTP 3.4DOHC V6
'95 GP SE Gone but not forgotten.
new exhaust w/cutout opened
Video of vs cam - Photobucket - Video and Image Hosting![]()
RETIRED - Z7 Turbo Kit w/T66, A2A I/C, stock cam & valvetrain/LS1 MAF/Ported 99TB/PowrTuner/AFC 2.2/Timing Commander/Devils Own Progressive Controller w/M2 Nozzle/LS1M Scanner/ZZP Stage 1 Fuel Pump Rewire/PRJ FP/65# Injectors - BACK TO STOCK
1998 firebird w/LQ4 Build in progress
So I know this has been beat to death already, but if I want my GTP to be just a little louder. My buddy has a '04 GP that he took the mufflers off of, it sounds ok but a little to loud for what I want. If I cut just the resonator of will that keep it decent sounding? I like a nice deep tone.
2000 GTP coupe, totally stock
1995 Chevy K2500 6.5 TD 4" straight pipe 285 BFG's on 16x8 American Racing Nitro's
^at idle yes.
Get on the throttle, like revving it or driving and accelerating and it will sound like ass.
~F~
i got one clip...but how do i post it on here from my comp? or do i have to go through photobucket?
http://www.cardomain.com/ride/2556536 NKG Iridium Plugs, 8mm Spiro Wires, ZZP Reprogrammed PCM, ZZP 3" full cat, ZZP Ceramic Coated Ported Manifolds, ZZP HV3, ZZP HVTB, ZZP ER Ratio Rocker Arms, ZZP Drilled 180* Thermostat, MotorSports Performance Intake, Reptile's IAT and dezldave tuned
yes photobucket
ok ill have to work at that then lol
http://www.cardomain.com/ride/2556536 NKG Iridium Plugs, 8mm Spiro Wires, ZZP Reprogrammed PCM, ZZP 3" full cat, ZZP Ceramic Coated Ported Manifolds, ZZP HV3, ZZP HVTB, ZZP ER Ratio Rocker Arms, ZZP Drilled 180* Thermostat, MotorSports Performance Intake, Reptile's IAT and dezldave tuned
Here is my old GTP:
- ZZP HL cam
- 3.2" pulley
- Pector PEMs
- 3" R/T downpipe with hi-flow cat
- GMPP 2.5" catback
http://www.reidonly.net/videos/HL-ca...exhaust-01.mov
http://www.reidonly.net/videos/HL-ca...exhaust-02.mov
http://www.reidonly.net/videos/HL-ca...xhaust-rev.mov
And one when I was demoddding LMAO!
http://www.reidonly.net/videos/reid-gtp-noexhaust.wmv
2005 Infiniti G35c 6MT (14.0 @ 102.3mph -- CURRENT)
2002 Camaro Z28 M6 (13.5 @ 108.7mph -- SOLD 4/2/08)
2000 Grand Prix GTP (13.2 @ 105mph -- SOLD 7/18/06) | www.reidonly.net
I'm looking at changing my mufflers, thinkin magnaflows from what I've heard. Anyone got the specs on what fits good or a part number would be great. I think everyone said they were 2.25 pipe but i'm not sure. Also considered Borla's but they sound pricey. All I'm looking for is a little louder but deep sound, without changing the whole system. Thanks!
2000 GTP coupe, totally stock
1995 Chevy K2500 6.5 TD 4" straight pipe 285 BFG's on 16x8 American Racing Nitro's
i put flowmaster 40s on my car with just a dp and it sounds pretyy nice and not too obnoxious.. the sound will really depend on what you do like res delete or cat delete which some ppl think is obnoxious.. i personally like the sound with the dp and u bend delete w/ cat.. i was thinking of deleting the res but i dunno if that will be obnoxious...
fst i like the sound of that exhaust...
anyone have any suggestions as to what i can do for exhaust.
i got an 01 black gtp 4 door. i'll be getting window tints soon but
i wanna make it fast. i don't know what kind of exhaust systems
are good and how much power they add..
let me know. thanks
thanks 01gtpnoob. but to be honest, stick with the stock mufflers as they sound very nice without the stock resonator/u-bend, stock cat, and 2.25" piping. just get a hi-flo cat, u-bend delete mod, increase the exhaust piping to 2.5" and get a decent resonator and you'd be set. my vs cammed setup sounded nice at idle but very crappy at WOT when i had the cutout open. now that im turbo'd it sounds way better both at idle and at WOT ;-)
RETIRED - Z7 Turbo Kit w/T66, A2A I/C, stock cam & valvetrain/LS1 MAF/Ported 99TB/PowrTuner/AFC 2.2/Timing Commander/Devils Own Progressive Controller w/M2 Nozzle/LS1M Scanner/ZZP Stage 1 Fuel Pump Rewire/PRJ FP/65# Injectors - BACK TO STOCK
1998 firebird w/LQ4 Build in progress
should i just buy a whole new magnaflow exhaust system or something?
would that be easier? or should i mod the parts like you said.
and i know that this sounds stupid but could you dumb down what you suggested a little lol. as my name suggests i'm a noob when it comes to modifying something like the ride i got. i've had it for about 4 months and i want to beef it up so that it's more powerful, sounds good and kicks some ass
OK here are my clips:
in garage part 1 (first put exhaust in)
YouTube - ‪2004 Pontiac Grand Prix Dual Flow Masters‬‎
in car (with CAI and PCM installed)
YouTube - ‪2004 Pontiac Grand Prix Dual Flow Masters‬‎
in garage part 2 (few months after part 1)
YouTube - ‪2004 Grand Prix Dual Flowmasters (Updated)‬‎
Here mine..This before i installed the high flow cat. I kept getting pestered by the 5-0, So i had to do something to quiet it down a bit..It sounds even better now. It has alotttt more tone than it did in this vid!YouTube - Grand Prix GTP Exhaust. Done myself
01' GTP. Weapon R SRI, Halos, Altezza Tails, U-bend Delete, Magnaflow CBE, ZZP 3in. DP, Ported Exhaust mannies, flashed pcm.
https://www.youtube.com/watch?v=Nxbj...e_gdata_player
Sent using Tapatalk 2 from my GS3.
Holy thread revival lol Sounds like **** like all 3800's lol
2001 GT. A few here and there modshttp://www.streetfire.net/video/2001...ynp_208097.htm
Bookmarks