Pontiac Grand Prix Forums : Grandprix
 

Grand Prix Forums is the premier Pontiac Forum on the internet. Registered Users do not see the above ads. Please Register - It's Free!

Pontiac Grand Prix Forum - Welcome Register today! Contact us!

Results 1 to 7 of 7

Need Help 3800 S/C Replacement Vendor

This is a discussion on Need Help 3800 S/C Replacement Vendor within the 3.8L V6 Supercharged (L67)(L32) forums, part of the Engine category; I'm working on my co-workers 2000 GTP, and his stock supercharger is trashed. Rather than getting a stock reman unit ...

  1. #1
    SE Level Member trickytransam's Avatar
    Join Date
    May 2009
    Location
    Michigan
    Posts
    31
    Chats
    0

    Default Need Help 3800 S/C Replacement Vendor

    I'm working on my co-workers 2000 GTP, and his stock supercharger is trashed.
    Rather than getting a stock reman unit for $800, I found one for $699 that was ported from 3800 performance.

    Does anyone have any experience with them?
    I checked on the BBB and they have an F rating, with 3 complaints, 2 within this year.
    He's got decent pricing and good packages, but somewhat fearful to buy with no contact information listed other than E-mail.
    Before I drop a grand or more...Id like to get some other folks thoughs on sources.

    Any info is appreciated

    **Edit for Clarification - this isn't a Poo Poo on any vendor in particular, but more smart shopping**
    Last edited by trickytransam; 03-02-2012 at 07:09 PM.

  2. #2
    I want a Volvo. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    11,768
    Chats
    52324

    Default Re: Need Help 3800 S/C Replacement Vendor

    how is it trashed, what is wrong with it? Whats it doing?

    I would go to a junkyard and find one or look in the for sale section, used blowers run around 100-175.

    But tell me whats wrong with the original, because it might not be over for it.

    SMGPFC Member #1

  3. #3
    SE Level Member trickytransam's Avatar
    Join Date
    May 2009
    Location
    Michigan
    Posts
    31
    Chats
    0

    Default Re: Need Help 3800 S/C Replacement Vendor

    It started rattling pretty bad. The pulley doesnt have much slop. Blower only had about 4oz of fluid which poured out silvery black with shavings.
    Rotors looked ok, but it sounds really loose almost like a rod knock. Take the belt off, and the rattle goes away.

    We would be more comfortable with a rebuilt unit with updates if possible just to make sure nothing else goes wrong.

  4. #4
    I want a Volvo. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    11,768
    Chats
    52324

    Default Re: Need Help 3800 S/C Replacement Vendor

    Hmm, maybe the 2 gears are ****ed and the bearings went bad.

    I would scan the for sale section or put up a wanted to buy add and I'm sure you will be able to find one for under 200 bones, sounds alot better than 600-800 to me.

    SMGPFC Member #1

  5. #5
    SE Level Member trickytransam's Avatar
    Join Date
    May 2009
    Location
    Michigan
    Posts
    31
    Chats
    0

    Default Re: Need Help 3800 S/C Replacement Vendor

    Quote Originally Posted by Fivefingerdeathpunch View Post
    Hmm, maybe the 2 gears are ****ed and the bearings went bad.

    I would scan the for sale section or put up a wanted to buy add and I'm sure you will be able to find one for under 200 bones, sounds alot better than 600-800 to me.
    He wants to go with a bit more performance while we're in there doing the job. Thats why I'd like to find him a ported blower and other quick bolt on goodies.

  6. #6
    I want a Volvo. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    11,768
    Chats
    52324

    Default Re: Need Help 3800 S/C Replacement Vendor

    Buy a used blower and port it yourself. Dont buy a ported blower from a vendor and waste 500 extra bucks when the mod you can do is free. The ported blower just increase's its ability to flow more air, but depending on his mod level it may not even need that extra little bit.

    It'll make it sound a little different tho, so id buy one and port it yourself.

    SMGPFC Member #1

  7. #7
    GrandPrix Junkie MoarkatsINmuhtrailer's Avatar
    Join Date
    Apr 2010
    Location
    Ohio
    Posts
    4,938
    Chats
    22318

    Default

    I have one for sale for 100.

Similar Threads

  1. 3800 Motor Replacement
    By pbxcomm in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 0
    Last Post: 01-04-2012, 03:40 PM
  2. 2004 grand prix 3800 series 3 power-steering pump replacement
    By quickster in forum General Tech Discussion
    Replies: 4
    Last Post: 03-17-2011, 12:24 AM
  3. Becoming A Supporting Vendor
    By Rocket468 in forum Vendor Forum Rules & Information
    Replies: 0
    Last Post: 03-12-2008, 02:59 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •