Removal
1. take the engine cover off.
2. while holding down the PCV valve access cover, remove the access cover bolts. (2)
3. remove the PCV valve access cover.
4. remove the PCV valve, the spring, and the O-ring from the supercharger.

Installation
1. Install the new O-ring, the spring and the PCV valve.
2. install the PCV valve access cover.
3. while holding down on the PCV valve access cover, install the access cover bolts.

Tighten the bolts to 10 N-m (89 lb in)

4. install the engine cover.

If you would like to make a comment or rate this write-up, please do so here.