Removal
1. remove the fuel injector sight shield (engine cover).
2. disconnect the MAP sensor electrical connector.
3. remove the MAP sensor.
4. use a 16 mm (5/8 in) socket to press the access cover down and rotate 1/4 turn counterclockwise.
5. remove the access cover.
6. remove the PCV valve and the O-ring from the intake manifold. Installation
1. install the new O-ring and the PCV valve.
2. install the access cover.
3. install the MAP sensor
4. connect the MAP sensor electrical connector.
5. install the fuel injector sight shield (engine cover). | 
