Heater Core Replacement 97-03

You will need a rachet with some long extensions and have the shifter in low

Undo the ruber hoses coming out from under the metal lines and coolant will come out, but not too much


Take the center console out, there will be bolts under it


Now take the top plate off, unscrew it from the shifter and under the radio then pull the whole console backwards and it will come out past the shifter.


Take the ugly carpet pieces near your feet off and undo all the gold srcews for the heater core cover. Removing the cover is the part that gave me the most trouble, I ended up cutting the duct that goes under the carpet and pulling like crazy to get it out (hint: take it out the drivers side)


You will see this after taking out both plastic pieces


Now pull it out by holding on to the top and bottom and reuse the clip at the back


Reverse to put back together

nice!! hope i never have to have this done!!!!!!

lol

haha, I wish I never had to

Nice write up on removing the AC condenser. Did you actually continue on to the heater core?

Oops my bad. Used to be if it was aluminum it was AC. Glad it was the heater core as it looks like the evaperator would be a real job.

Isn't that the A/C condenser that you removed?

nope, unless the haynes repair book is wrong

Thanks for the write up. I will use this as a loose guide to change the heater core in my 2006.

It should be almost the same, but if you have any questions on it, shoot me a pm