Halo LED Projector Headlights 97-03 Grand Prix

Originally Posted by DanGTP

Awesome! I'm glad we have someone willing to test them out. Thanks in advance for the review.

Well since i had to return my old Projecters


I can't stand the sight of the stock fugly ones.

More then willing to contribute to GPF.net and Dash Z with their Excellent Customer Service

That's good to hear. I also pmed them just in case they need someone close by to work with. They are only about a 45 min drive for me.

Yeah close by would be nice.

but i have quite a history with Dash Z.


besides Florida is where all the Real Streets are.

Originally Posted by Spartangl

I will be Giving these a Full Review and Installation Write-up Within the Next Week. Dazh Z Racing has Selected me to give these Halo LED Black Projector's a Full Review.



Main Area's of Focus/concern

*Mounting Bracket Strength
*Installation Simplicity
*Quality
*Light Output
*Beam Output


The Review should be posted by next week.

-Spartan GL

Other things that are important:

*Light cutoff
*Quality of seal (fogging issues)

They may be covered in your list there, but they're also things you should look for.

GOODLUCK.

And if this goes well i'd assume that we'll still able to get the group buy price?

Originally Posted by matt5112

Other things that are important:

*Light cutoff
*Quality of seal (fogging issues)

They may be covered in your list there, but they're also things you should look for.

GOODLUCK.

And if this goes well i'd assume that we'll still able to get the group buy price?

*Light cutoff

was my

*beam output

That weird beam display kinda concerns me

Good to hear you know what you're talking about so you'd better produce a quality review!

Originally Posted by matt5112

Good to hear you know what you're talking about so you'd better produce a quality review!

Ive been through 2 sets of Cheap Projectors.

Both had bad Light Beam output (Kinda odd shaped)

and one of my HID blubs kinda flickered



I hope this are Superior Quality

so you already tried the two main ebay styles?

Originally Posted by Spartangl

besides Florida is where all the Real Streets are.

post pics of the bulbs as well. H3 style bulbs are usually meant for fog lights.

Originally Posted by matt5112

so you already tried the two main ebay styles?

No, i had 2 Pairs of these
97-03 Pontiac Grand Prix Halo Projector Headlights - Black

Dash Z stopped ordering from this Distributor

Originally Posted by Spartangl

No, i had 2 Pairs of these
97-03 Pontiac Grand Prix Halo Projector Headlights - Black

Dash Z stopped ordering from this Distributor

And those were the ones I was considering. Seems they're not worth it.

A Pair of $210 LED Projectors poped up today?

97-03 Pontiac Grand Prix Halo LED Projector Headlights - Black

Where did these come from?

I've seen those before..

I am ordering a pair of these new Headlights also. I'm gonna give a review also and probably some vids of installation and what not. I'll try and pay for them tomorrow. Hopefully they are worth the money

Originally Posted by Spartangl

A Pair of $210 LED Projectors poped up today?

97-03 Pontiac Grand Prix Halo LED Projector Headlights - Black

Where did these come from?

those are the worst projectors for our car. Those w/ hids give out worse output then stock w/ halogen

and spartan, could you help me install my hids in my projectors?

Originally Posted by rocafella2032

those are the worst projectors for our car. Those w/ hids give out worse output then stock w/ halogen

and spartan, could you help me install my hids in my projectors?

is it the projecters that has the Rubber Cone on the back of the low beams?

yes sir, in the sig

well if you got the projectors already installed.


Just take that rubber Cone off. Cut a Hole in the back of it Round the wires.

Remove the Projector bulb

slid the HID bulb Through that hole in the back of the Rubber cone


Take off the Ground thats connected to the Projector Frame

Plug your Black Ground (Thats connected to the HID wiring) plug it into that socket and Put the Red into the Red.

Connect the Ballast Plugs Slide the Rubber cone back on. Bolt/ziptie the ballast to something. I used this metal part in the Fender (was a ***** to get to but it worked out)

and Reconnect the Headlights to the Frame and Tada! your finished

Currently waiting for money to transfer to the Paypal account. Then I will purchase these headlights and test them for you guys

nawarkk, your PM has been replied

Any updates