Have on 08 that is a willing tester
This is a discussion on FS: BRIGHT LED Conversion Kit!!! (upgrade your lights, great easy mod!) within the Diode Dynamics forums, part of the Supporting Vendors category; Have on 08 that is a willing tester...
Have on 08 that is a willing tester
_______________________
2002 Acura Rsx Type S - K20A2
Canadian Tire does not have the bulbs we sell, only low-powered, overpriced bulbs. Please refrain from further posts promoting products other than the topic of this thread- this is in a sponsor area. Thank you.
Ummmm I didn't know someone could be so impatient over a few LED bulbs lol...mail is not that slow and I duno about those guys but Paul here does sell a solid product that lasts.
and sadly yes he is right to be a sponsor he must pay $$ and it's not right to promote another company against his legitly owned area after he has proven good faith, a legit company, and awesome products with no problems...please don't do that, it is not fair. If you must promote another business by comparing prices, pros, and quality, send someone a PM but not here please.
How would you feel is you owned a Chevy dealership and some guy walked on the lot and told potiental customers that mustangs were cheaper and ready to ride at the Ford dealership? You would kick their butt off your dealership property lol! or they set-up signs on the property stating comparision to a differn't vehicle on your lot from the competition...ouch...
Eh so well, thanks for your compliance and understanding...Goodluck!
2011 Honda Civic EX-L - Leather/Sunroof/LOADED!
2009 Saturn Aura XE - I got shift paddles!!!
'98 Olds Cutlass - Good, Dependable
'06 GP GT S/C - Traded it in![]()
![]()
Thanks for your post! And thank you to everyone for your orders.
![]()
New to Grand Prix/3800 motors click->http://www.grandprixforums.net/safel...0-a-67580.html (Safely Modding Your 3800!)
interested in a kit for my 07 gt but cant find a link to purchase the package? i must be overlooking it or something?
Hi Paul,
I installed your LED board in the trunk of a 2004 GP. It will only light up if the key is in the ignition. Do you happen to know of a way to get the LED to light up when the trunk is popped without the key in the ignition?
Irridium spark plugs last 100k mi and work just as well as copper. Copper is a waste on N/A and only lasts 15k mi. Don't use Platinum.
Use 195* tstat unless you can thoroughly explain why not; 99.9% don't need a lower temp.
Almost any oil filter, ever, is of higher quality than ACDelco. Spend $6+.
It should work exactly like stock. Please ensure the buttons are all pressed the same (sounds stupid, but you never know!) and that the bulb is fully installed making complete connection. Thanks!
The bulb is fully installed and the connection is complete, as near as I can tell.
Popping the trunk without the key in causes the board to output ~10% light, significantly less than the stock bulb. When they key is in, it's light broad daylight in the trunk.
This is the same case for the vanity mirrors and the glovebox, though I pretty rarely use those without the key in, so they don't bother me.
It strikes me as some sort of dirty ground issue, but I can't imagine how turning the key changes that without actually starting the car. If I swap the stock bulbs back, they work at full brightness.
Irridium spark plugs last 100k mi and work just as well as copper. Copper is a waste on N/A and only lasts 15k mi. Don't use Platinum.
Use 195* tstat unless you can thoroughly explain why not; 99.9% don't need a lower temp.
Almost any oil filter, ever, is of higher quality than ACDelco. Spend $6+.
Please feel free to post questions or comments!
Just installed a set in my 99 grand prix and in my brothers 03 grand prix. They look great. We both had slight issues with the trunk light board. It seems that the ground pin on the mini connector seems to pop out once in awhile, causing an intermittent connetion. I was able to remedy a fix to keep the pins intact. Right now they are both working just fine. Other than that they all work and they look great.
One thing I forgot to mention, is that the vanity mirror LEDs are larger than the factory bulbs. They will pop off when trying to leave the bulb in these on it's own. We had to use the plastic cover to hold them in place. But they look great.
Last edited by The Guz; 05-21-2012 at 02:53 AM.
1999 GT 18" BLK Falken Koblenz|SLP CAI|Borla Cat Back|HV3|HV TB|ER Rockers|Black Headlights|GMPP Lowering|GMPP Handling|Red LED Tails|MPD F1|
www.fquick.com/The_Guz
It can be a little tricky, but I am glad you got them working!
Paul do you guys offer any type of LED replacement for a 561 rigid loop bulb? This is for the dome light bulb for my 2002 Camaro SS.
1999 GT 18" BLK Falken Koblenz|SLP CAI|Borla Cat Back|HV3|HV TB|ER Rockers|Black Headlights|GMPP Lowering|GMPP Handling|Red LED Tails|MPD F1|
www.fquick.com/The_Guz
Unfortunately we do not offer any bulbs in that size.
Hey Paul. Was just in your store a week ago getting an HID kit for my 05 GXP. I'm looking to upgrade some LED's. I know you carry the 194, 3157, and H11 bulbs I'm gonna get. Just wondering if you have any bulbs to replace a 3057 taillight, 2825 Interior light, and a 4157NA front turn signal?
is the stage 3 kit for my 2000 and plug and play?
Yes all our led bulbs are plug and play
Emily
Bookmarks