Hardinge Lathe

8sec-z · 01-31-2008, 09:30 PM

I have a Hardinge DV-59 manual lathe for sale. It is a DV-59 / DSM-59. It is 460V 3 phase. It also has a Gusher coolant pump in a self contained system. It has all the guards and an E-stop button. 6 station turret on a dovetail bed. 5C style headunit. Plexiglass covers for the back of the machine. 3/4hp motor. It is like new. Very good piece. Well taken care of. Probably never wrecked. Our maintenance dept. is top notch. I work for a major medical implant company and this machine was in the customs area, NOT in general production, so it didn't see any crashes or setups. It basically has the same setup in it for a few years. I asked everyone that used it and they all said it is an impressive machine. Very tight. I didn't clean it. I am keeping it my heated shop. It won't be used for a while so I left the oil and chips on it for fear of cleaning it and having it rust. Original paint- not resprayed like some people trying to make it appear "as new". I don't need to describe it anymore, check out the pictures.

$5500 delivered to your dock within 50 miles of Warsaw, IN.

Thanks
Brad
ali11_13 at hotmail dot com

Photobucket link:
8sec-z - Photobucket - Video and Image Hosting

I also have a Molectrics model 300 Electropolish unit for sale. Pictures on same photobucket account.

8sec-z · 01-31-2008, 09:32 PM

Zef_66 · 02-01-2008, 06:58 AM

These are damn nice lathes. Perfect for small tool room work. Would be nice if it was a little larger for me.

8sec-z · 02-01-2008, 07:24 AM

Quote:

Originally Posted by Zef_66

These are damn nice lathes. Perfect for small tool room work. Would be nice if it was a little larger for me.

Thanks for the kind words!
I can be flexible on the price...
Or give me 14K and I will throw in my Regal

!

shaferz · 02-13-2008, 09:40 PM

Nice lathe. I learned my skills on the exact same model machine.

Now if only I had 3P power available to me in my garage...

turbocharged406sbc · 02-15-2008, 02:35 PM

Quote:

Originally Posted by shaferz

Nice lathe. I learned my skills on the exact same model machine.

Now if only I had 3P power available to me in my garage...

i'm stuck with getting a VFD... nice hardinge did you post this on practicalmachinist.com ? one in that nice of shape is pretty well sought after...

8sec-z · 02-17-2008, 08:31 AM

3 phase can be cheap if you buy the right converter. They aren't real expensive. It is a top notch lathe. I haven't listed it there. I will check it out. Thanks

8sec-z · 02-28-2008, 02:53 PM

SOLD. Thanks.

01-31-2008, 09:30 PM	#1
8sec-z SE Level Member Join Date: Dec 2007 Location: Indiana Posts: 42 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0) Rep Power: 0	Hardinge Lathe I have a Hardinge DV-59 manual lathe for sale. It is a DV-59 / DSM-59. It is 460V 3 phase. It also has a Gusher coolant pump in a self contained system. It has all the guards and an E-stop button. 6 station turret on a dovetail bed. 5C style headunit. Plexiglass covers for the back of the machine. 3/4hp motor. It is like new. Very good piece. Well taken care of. Probably never wrecked. Our maintenance dept. is top notch. I work for a major medical implant company and this machine was in the customs area, NOT in general production, so it didn't see any crashes or setups. It basically has the same setup in it for a few years. I asked everyone that used it and they all said it is an impressive machine. Very tight. I didn't clean it. I am keeping it my heated shop. It won't be used for a while so I left the oil and chips on it for fear of cleaning it and having it rust. Original paint- not resprayed like some people trying to make it appear "as new". I don't need to describe it anymore, check out the pictures. $5500 delivered to your dock within 50 miles of Warsaw, IN. Thanks Brad ali11_13 at hotmail dot com Photobucket link: 8sec-z - Photobucket - Video and Image Hosting I also have a Molectrics model 300 Electropolish unit for sale. Pictures on same photobucket account. __________________ 98 Z28, stock.... Last edited by 8sec-z; 01-31-2008 at 10:04 PM.

01-31-2008, 09:32 PM	#2
8sec-z SE Level Member Join Date: Dec 2007 Location: Indiana Posts: 42 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0) Rep Power: 0	Re: Hardinge Lathe __________________ 98 Z28, stock....

02-01-2008, 06:58 AM	#3
Zef_66 GTX Level Member Join Date: Dec 2007 Location: Middleburg, PA Posts: 920 Thanks: 0 Thanked 4 Times in 4 Posts iTrader: (0) Rep Power: 1	Re: Hardinge Lathe These are damn nice lathes. Perfect for small tool room work. Would be nice if it was a little larger for me. __________________ 1997 GTP - 196xxx miles, PEMs, 3" SS Exhaust w/ Borla Mufflers, 3.4", 180* stat(summer), FWI, 1.84 RR, PT, SLP hood, KYB GR2s, GMPP Handling Kit, etc...

02-13-2008, 09:40 PM	#5
shaferz SE Level Member Join Date: Dec 2007 Location: Forrest IL Posts: 145 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0) Rep Power: 1	Re: Hardinge Lathe Nice lathe. I learned my skills on the exact same model machine. Now if only I had 3P power available to me in my garage... __________________ 2007= 12.936 @ 112.12 2.16 60' badly need slicks...

02-17-2008, 08:31 AM	#7
8sec-z SE Level Member Join Date: Dec 2007 Location: Indiana Posts: 42 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0) Rep Power: 0	Re: Hardinge Lathe 3 phase can be cheap if you buy the right converter. They aren't real expensive. It is a top notch lathe. I haven't listed it there. I will check it out. Thanks __________________ 98 Z28, stock....

02-28-2008, 02:53 PM	#8
8sec-z SE Level Member Join Date: Dec 2007 Location: Indiana Posts: 42 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0) Rep Power: 0	Re: Hardinge Lathe SOLD. Thanks. __________________ 98 Z28, stock....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode