I keep blowing bead seals and valve stems on my car I have a '01 Special Edition. I am thinking that it has to be the rims, I have gone through 3 bead seals and about 8 valve stems. Anyone out there have any ideas besides new rims, I like to keep them they have "special edition" on the hub and it ties the car together.
Thanks
GiKuke

Installer error

__________________
We can’t help ourselves. We see a line, we want to cross it. Maybe it’s the thrill for trading the familiar for the unfamliliar. A personal dare. The only problem is once you’ve crossed it’s almost impossible to go back. But if you do manage to make it back across that line you find safety in numbers.

bead seals.......not enough air in the tire when tire is installed to ''seat'' the bead/tire?


what do you mean by blowing a valve stem?

__________________
1999 Silver GTP~HP Tuners~XP cam~ZZP FS Intercooler~#4 FMHE~ZZP 78mm Billet Throttlebody~LQ4 MAF~Lucas 42.5's~ZZP SS Headers~2.8 MPS~PRJ fuel logs~Ported & Polished S/C~TDCRacing FWI ~Built Tranny-3.29's-7/8's chain-Intense forged Input Shaft~

Running mid-high 12's
Get you're TDCRacing Fenderwell Intake Today!

By "blowing" valve stems I meant that they went bad, or that was what the mechanics said. I have had a lot replaced as well my bead seals. How many PSI should they be installed at?

forget what i said..i thought the conditions were different...X2 on the above comment

__________________
1999 Silver GTP~HP Tuners~XP cam~ZZP FS Intercooler~#4 FMHE~ZZP 78mm Billet Throttlebody~LQ4 MAF~Lucas 42.5's~ZZP SS Headers~2.8 MPS~PRJ fuel logs~Ported & Polished S/C~TDCRacing FWI ~Built Tranny-3.29's-7/8's chain-Intense forged Input Shaft~

Running mid-high 12's
Get you're TDCRacing Fenderwell Intake Today!