wisconsin

boosting98 · 03-29-2008, 05:58 PM

alright, so i had asked this in another post. but what size pulley is good to run for a dd?

Bio248 · 03-30-2008, 07:58 PM

you can DD any pulley you want as long as you keep it tuned right and have all the correct supporting mods.

however, i feel that my car with a my mods below (headers/rockers/throttle body/3.4) its pretty damn fast for the street. i have zero traction in first gear since i have 3.29s in the gt tranny.

Pontiac1 · 04-06-2008, 02:03 PM

nice, we should make sure all you wisconsinites come over to MN for our annual Twin Cities Gathering in June :-)

Bio248 · 04-07-2008, 01:58 PM

too far for me. i dont like taking my car any more than an hour out of town. it dont run like it used to, hah.

Bio248 · 04-07-2008, 05:14 PM

double post, but..

anyone going to drive the mile? ive gotta send in my paperwork within the next few days.

skubasteve! · 04-18-2008, 07:02 PM

Madison here.

boosting98 · 04-24-2008, 04:39 PM

idk where to post this. but anyone know of a good body shop around the milwaukee area?

GreenNirvana101 · 04-24-2008, 05:10 PM

Not to highjack - but does anybody know of any good shops or mechanics in general that do honest, good work at a nice price. Located around the Waukesha or Milwaukee County area.

I'm going to install a new front sway bar, and this summer I need to replace my LIM gasket, coolant elbows, injector o rings, supercharger gasket, rear valve cover gasket, and intake o-rings....

Fun stuff - I know. I need to either
A) Find a good shop that I can trust has worked on these cars and knows what they are doing... for the right price.
Or B) Find a member on here that has done this stuff before and could pretty much do it while showing me how for the right price....

hint hint.... I'm looking for option B and will pay $15-20 an hour. lol.

bad1999gtp · 04-25-2008, 08:37 AM

well i not close to waukesha but i do all my own work. and i just got done doing the aluminum intake gaskets on our gtp i would not charge you 15 bucks a hour but we could get it done for you if you were up for a drive.

GreenNirvana101 · 04-25-2008, 01:12 PM

Quote:

Originally Posted by bad1999gtp

well i not close to waukesha but i do all my own work. and i just got done doing the aluminum intake gaskets on our gtp i would not charge you 15 bucks a hour but we could get it done for you if you were up for a drive.

How much would you charge?

03-29-2008, 05:58 PM	#41
boosting98 GTX Level Member Join Date: Mar 2008 Location: Wisconsin Posts: 749 Thanks: 1 Thanked 5 Times in 5 Posts iTrader: (1)	Re: wisconsin alright, so i had asked this in another post. but what size pulley is good to run for a dd? __________________

03-30-2008, 07:58 PM	#42
Bio248 GTP Level Member Join Date: Jan 2008 Location: WI Posts: 1,378 Thanks: 0 Thanked 8 Times in 8 Posts iTrader: (1)	Re: wisconsin you can DD any pulley you want as long as you keep it tuned right and have all the correct supporting mods. however, i feel that my car with a my mods below (headers/rockers/throttle body/3.4) its pretty damn fast for the street. i have zero traction in first gear since i have 3.29s in the gt tranny. __________________ 98 XGT - 3.2/3.4, s&s, ported m90/TB/LIM, 1.9s, jp dbl; tinted, blacked out, lowered soon -> e85, meth, and a lot smaller pulley

04-06-2008, 02:03 PM	#43
Pontiac1 SE Level Member Join Date: Jan 2008 Posts: 25 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	Re: wisconsin nice, we should make sure all you wisconsinites come over to MN for our annual Twin Cities Gathering in June :-) __________________ SLP headers, Gen V, Full size IC, XPZ!!

04-07-2008, 01:58 PM	#44
Bio248 GTP Level Member Join Date: Jan 2008 Location: WI Posts: 1,378 Thanks: 0 Thanked 8 Times in 8 Posts iTrader: (1)	Re: wisconsin too far for me. i dont like taking my car any more than an hour out of town. it dont run like it used to, hah. __________________ 98 XGT - 3.2/3.4, s&s, ported m90/TB/LIM, 1.9s, jp dbl; tinted, blacked out, lowered soon -> e85, meth, and a lot smaller pulley

04-07-2008, 05:14 PM	#45
Bio248 GTP Level Member Join Date: Jan 2008 Location: WI Posts: 1,378 Thanks: 0 Thanked 8 Times in 8 Posts iTrader: (1)	Re: wisconsin double post, but.. anyone going to drive the mile? ive gotta send in my paperwork within the next few days. __________________ 98 XGT - 3.2/3.4, s&s, ported m90/TB/LIM, 1.9s, jp dbl; tinted, blacked out, lowered soon -> e85, meth, and a lot smaller pulley

04-18-2008, 07:02 PM	#46
skubasteve! SE Level Member Join Date: Apr 2008 Posts: 18 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	Re: wisconsin Madison here. __________________ Mine: 2004 Jeep Grand Cherokee Columbia Edition 4.7HO Hers: 2004 Pontiac Grand Prix GT-Stock

04-24-2008, 04:39 PM	#47
boosting98 GTX Level Member Join Date: Mar 2008 Location: Wisconsin Posts: 749 Thanks: 1 Thanked 5 Times in 5 Posts iTrader: (1)	Re: wisconsin idk where to post this. but anyone know of a good body shop around the milwaukee area? __________________

04-24-2008, 05:10 PM	#48
GreenNirvana101 GT Level Member Join Date: Feb 2008 Location: Wisco Posts: 200 Thanks: 1 Thanked 3 Times in 3 Posts iTrader: (1)	Re: wisconsin Not to highjack - but does anybody know of any good shops or mechanics in general that do honest, good work at a nice price. Located around the Waukesha or Milwaukee County area. I'm going to install a new front sway bar, and this summer I need to replace my LIM gasket, coolant elbows, injector o rings, supercharger gasket, rear valve cover gasket, and intake o-rings.... Fun stuff - I know. I need to either A) Find a good shop that I can trust has worked on these cars and knows what they are doing... for the right price. Or B) Find a member on here that has done this stuff before and could pretty much do it while showing me how for the right price.... hint hint.... I'm looking for option B and will pay $15-20 an hour. lol. __________________ Former Camaro muscle and DSM *turbo* owner - now moving into the GTP *Supercharged* world! 1997 GTP - STOCK.... for now

04-25-2008, 08:37 AM	#49
bad1999gtp GT Level Member Join Date: Jan 2008 Location: eau claire, wisconsin Posts: 150 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	Re: wisconsin well i not close to waukesha but i do all my own work. and i just got done doing the aluminum intake gaskets on our gtp i would not charge you 15 bucks a hour but we could get it done for you if you were up for a drive. __________________ ported m90,ported lower,160 tstat,headers,3in dp,cat&resi delete,flowmaster 44's,103's,zzp ic,42.5 inj,N*,3.4 pulley,cust. pcm,ported heads,cai,drilled&slotted rotors,gmpp sway bars

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode