I need a set of child seat anchors for the back seat. It's a plate that bolts in under the rear seat, not the loops in the back window area.

I think I have TWO sets! Email me. (Gives me time to find them in my toolbox...)

Looks like this:

Crap, no. I have the ones for the upper speaker deck. I tried getting some lower LATCH anchors for my 97, and they are unobtainable at any cost (other than a new vehicle). I have always wanted to manufacture my own, but I was told by many of authority that I should absolutely NOT make my own baby seat LATCH anchors, and just use the lap belt in accordance with the seat manufacturer's instructions. Those loops appear to be welded to the lower plate. Is the lower plat what you are looking to replace? Might check with Ed Morad unless that plate is spot welded to the chassis somewhere...

__________________
Click below for GP electrical mods!

www.backinblackgp.com

I would have to agree Back In Black, I can just see the liability issues. I think I would be afraid to do it even if I had welding certifications.

__________________
Scotty Hall
Bartlesville, OK
2001 Pontiac Grand Prix GTP
It whines a lot, but I like it.

The only limitation you will ever face in life is yourself!

Found one from a wrecked 2003, should be here some time next week!

__________________
debadged, clear corners, 20% tint, tinted tails, vibrant performance tips, red painted calipers, Fig. grills, autometer guages, PFYC 3 pod A pillar, SLP CAI, 2.5" DP, SD Hood, SD front air damn, Gen I spoiler, 17X8 Borbet Type M rims, engine upgrades soon!
My Cardomain

Yes, messing with a LATCH system without a proper GM tech is a big no no. Ive been using the lap belt but Im getting sick of how loose the seat looks/feels. Im thinking about taking my car and the exs car in to Pontiac/Buick and having the LATCH system retrofitted since I was told it can be done.

__________________
1997 Das Regal GS

be sure you ask to see the parts that are in the 'retrofit kit' before they are installed. back when we got our regal, we asked about the kit, and the only thing available at that point was the top teather kit, not the lower LATCH kit. the upper kit consisted of a bare grade 5 bolt thru the rear deck, holding down a peice of metal (roughly 1/8th thickness) with a hole in it for the strap hook. it looked HORRID. and it would not even fit in the right place behind the seat, due to the speaker pods!

The ones on top are for forward facing correct?? If so I would imagine that those are the only two used. I know the lower ones are for rear facing.

Yeah, definatly dont want some POS brackets holding the seat down. Id probably use the lap belt ontop of it all anyway just cause IM paranoid like that.

__________________
1997 Das Regal GS

yeah the top ones are for forward facing... when we've used those in my suburban, we use that in conjunction with the regular seat belt.