Hi 2001 grand prix gt after maket

Sony cdx-gt50w
kicker L5
kenwood 9103d mono amp

I just purchased new kenwood 6x9 for the rear deck how can i hook these up to the amp so that the subwoofer and the back are being powered by the amp I changed out the amp with a older two channel and dont think i'm doing it right they sounded like crap. I just need some good advice from smart people thanks for the help

are you using a sub out on the radio? What 2 channel amp is it?

__________________
Steve
'97 GTP VS cam, ZZP PCM, and not much else yet

Yes i am using the sub out on the head unit. I have an older pioneer two channel amp that is stable down to two ohms and the subs are 4 ohms also still have the kenwood 9103d 1600 watt mono amp

if your using sub out to 6x9's that is the problem, wrong frequencies they will distort pretty quickly

__________________
Steve
'97 GTP VS cam, ZZP PCM, and not much else yet

What is the best way to hook it all up. Like i said earlier I have a sony heaad unit and two kenwood 6x9 speakers in the rear deck. Also have 1 kicker l5 subwoofer and a kenwood 9103d mono amp. I want the loudest systm possible with what i have any ideas. thanks

use the rear preouts for the amp on the 6x9's be sure to have a good distribution block for power, and I like to run a relay when doing multiple amps on the remote turn on to keep from burning it up

__________________
Steve
'97 GTP VS cam, ZZP PCM, and not much else yet

What do you mean the rear preout? Where do i hook the wires from the back of the 6x9 to. Also can i hook up the factory wires to the rear speakers and then aslo hook up my own wires to the rear speakers and the amp. thanks for the help

you need to pull the radio out, and run an rca line from the radio to the amp, then the 6x9's hook to the amp

__________________
Steve
'97 GTP VS cam, ZZP PCM, and not much else yet

thank man for all your help i will do this tonight and let everyone know like i said i really appreciate it thanks