ok, i know you have to connect the line output converter to the rear deck speakers.

my question is.. do i splice the wires from the speakers or can i just connect the wires to the same spot where the wires already are.

like in this picture, i dont want to splice the wires because they are already very short so could i just wrap the wires from the LOC around the end of them? (the blue spot)

you can do that, but the connection isn't very good

__________________
Steve
'97 GTP VS cam, ZZP PCM, and not much else yet

i can do what?
wrap the wire around the connection point?

yes

__________________
Steve
'97 GTP VS cam, ZZP PCM, and not much else yet

Tap into the wires before the plug on the speaker or behind the radio. Dark Blue/Light Blue is Right, Brown/Yellow is Left. Dark Blue and Brown being (+)

but the wires are so short if it would be extremely had to do that in such a tight space

I soldered my LOC wires right on the speaker terminals along with the 6x9 lines. That way i KNOW i have a solid connection.

Whatever you do, don't just tie the wire around it. Extend the wire or something if it's too short.

__________________

2.8 Pulley, Intense IC, P&P Gen V, Machined Intake, Intense PCM, 65lb/hr Injectors, N* Throttle Body, 1 3/4" Headers, 3" Exhaust, Intense Shift Kit, 3.69:1 Gears, 4000 Stall, N20