Where can I get one that works with the OEM amp? Everywhere I look it says works only with GP's without OEM amps. I want to retain my center and rear deck speakers for awhile. Anyone got a link or can order one? Btw I really dont car about chimes so thats not an issue

__________________
MECA SQ JL AUDIO 500/1, 300/4, 3-10w1v2, XR650-CSI, Kenwood DDX-6019 , Alpine amp and JL TR400CX center channel , 300 lbs of Dynamat.

Do you have the Monsoon sound system?

__________________

97 GTP~K&N Cold Air Intake~3.4" S/C Pulley~Cat Back Exhaust~MSD Blaster Coil Packs~MSD 8.5mm Wires~NGK TR55IX Plugs~More To Come

yup

__________________
MECA SQ JL AUDIO 500/1, 300/4, 3-10w1v2, XR650-CSI, Kenwood DDX-6019 , Alpine amp and JL TR400CX center channel , 300 lbs of Dynamat.

I've been looking around also and like you haven't found anything yet. I'm not going to give up on it. Somebody has to have it. Have you tried getting in touch with crutchfield yet? Looked on there website and they were only showing for the basic hook ups. There is alot of times, they won't advertise the product, but if you call, they'll usually have it or can tell you where to get it. But, I'll keep looking on my end also.

__________________

97 GTP~K&N Cold Air Intake~3.4" S/C Pulley~Cat Back Exhaust~MSD Blaster Coil Packs~MSD 8.5mm Wires~NGK TR55IX Plugs~More To Come

2004-06 PONTIAC GRAND PRIX RADIO DASH KIT COMBO 95-3527 - eBay (item 360073821550 end time Jul-31-08 21:08:49 PDT)

Will this work?

__________________
MECA SQ JL AUDIO 500/1, 300/4, 3-10w1v2, XR650-CSI, Kenwood DDX-6019 , Alpine amp and JL TR400CX center channel , 300 lbs of Dynamat.

Are you using the regular one din radio? If so, the dash kit would be the only thing that would worry me because it doesn't look like it comes with any filler panels and would cause your radio to flop around. You could pick up a single din dash kit, but that seems to be alot of money to have to buy an additional dash kit. Let me check a couple things and I'll get back to you in a few minutes.

__________________

97 GTP~K&N Cold Air Intake~3.4" S/C Pulley~Cat Back Exhaust~MSD Blaster Coil Packs~MSD 8.5mm Wires~NGK TR55IX Plugs~More To Come

Nah its a double din dvd.

__________________
MECA SQ JL AUDIO 500/1, 300/4, 3-10w1v2, XR650-CSI, Kenwood DDX-6019 , Alpine amp and JL TR400CX center channel , 300 lbs of Dynamat.

To me it sounds like a winner. Are you going to be running a sub box and seperate amp?

__________________

97 GTP~K&N Cold Air Intake~3.4" S/C Pulley~Cat Back Exhaust~MSD Blaster Coil Packs~MSD 8.5mm Wires~NGK TR55IX Plugs~More To Come

Yea, the only reason I want it is to use the rear deck and center channel on the factory amp for now. I have the front stage on the SX700.4. Eventually I will go all aftermarket amps around but for now want to use the factory amp.

__________________
MECA SQ JL AUDIO 500/1, 300/4, 3-10w1v2, XR650-CSI, Kenwood DDX-6019 , Alpine amp and JL TR400CX center channel , 300 lbs of Dynamat.

Sounds like a good plan. You never lnow though, your highs might turn out to sound awsome just being on the factory amp. Had mine ran that way for a little while, but I didn't have a fac amp, just ran the highs off the HU and had my subs. Didn't sound bad, but there is always a time for upgrades. Let me know how it turns out for you and if there is anything else that I may be able to help you with, let me know.

__________________

97 GTP~K&N Cold Air Intake~3.4" S/C Pulley~Cat Back Exhaust~MSD Blaster Coil Packs~MSD 8.5mm Wires~NGK TR55IX Plugs~More To Come