This is a discussion on Getting ready to swap the tranny chain... within the W Body 1997 to current 4 speed Automatic (4T65E) (4T65E-HD) forums, part of the W Body Tech category; ... I think Im gonna do it myself. Ive also got a ZZP pump shaft. For someone that has never ...
| |||||||
05-21-2008, 08:09 PM
| #1 |
| SE Level Member  |  Getting ready to swap the tranny chain... ... I think Im gonna do it myself. Ive also got a ZZP pump shaft. For someone that has never done anything inside the tranny except change a solenoid, would it be recommended to not do this myself? I dont want to plop down $$$$ to have it put in locally and them do a hackjob and I dont have a place or equipment to pull the tranny myself.
__________________ Dark Teal 97 GTP - 3.69 tranny - 2500 stall - XP cam - 130# springs - Ceramic ZZP Z7 62-1 - air to air intercooler with Turbonetics Raptor BOV - 72mm ported stock throttle body - 65# injectors - Autolite 103s - custom 3" exhaust Last edited by Tengis; 05-22-2008 at 11:49 AM. |
|        |
|
05-22-2008, 10:36 AM
| #2 |
| Transmission Expert  Join Date: Dec 2007 Location: Fort Wayne, IN
Posts: 1,275
Thanks: 0
Thanked 23 Times in 21 Posts
iTrader: (3)  | Re: Getting ready to swap the tranny chain... I have a writeup somewhere on here, probably in the tech articles section and it shows how to install a chain set. You really need to have a tech manual on hand to be able to follow and check things. It is a pretty big job to do and very involving inside the trans, make sure you have all of the gaskets you will need before you are stuck with a no moving car!
__________________ www.TripleEdgePerformance.com 4T65E Transmission Info Voted GPF.net Community Hero  |
|
| |
|
05-22-2008, 11:49 AM
| #3 |
| SE Level Member | Re: Getting ready to swap the tranny chain... Trannyman... if you were closer I would come drop my car off on my lunch break =p.
__________________ Dark Teal 97 GTP - 3.69 tranny - 2500 stall - XP cam - 130# springs - Ceramic ZZP Z7 62-1 - air to air intercooler with Turbonetics Raptor BOV - 72mm ported stock throttle body - 65# injectors - Autolite 103s - custom 3" exhaust |
|
| |
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
| ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| WTB: W-body store race ready control arms | fatride99 | Wanted Items | 0 | 05-21-2008 11:23 AM |
| chain decision | kevlws23 | W Body 1997 to current 4 speed Automatic (4T65E) (4T65E-HD) | 7 | 05-05-2008 12:15 AM |
| Which timing chain? | whitcomb | 3.8L V6 Supercharged (L67)(L32) | 51 | 02-01-2008 04:49 PM |
| gm 1 in chain | kevlws23 | W Body 1997 to current 4 speed Automatic (4T65E) (4T65E-HD) | 0 | 01-21-2008 01:36 AM |
Linear Mode
