Grand Prix Forums (Grandprixforums.net)
Register Now

clarity audio electronics

3.8L S/C Recal. Quick question.

This is a discussion on 3.8L S/C Recal. Quick question. within the 3.8L V6 Supercharged (L67)(L32) forums, part of the W Body Tech category; I read the info about the recal, and it said engine oil drips on the exaust manifold.... Well guess what, ...


Go Back   Grand Prix Forums (Grandprixforums.net) > W Body Tech > 3.8L V6 Supercharged (L67)(L32)

Notices

Reply

 

LinkBack Thread Tools Display Modes
Old 07-08-2008, 09:26 PM   #1
GT Level Member
 
Freebeer187's Avatar
 
Join Date: Jun 2008
Location: Bartlett, IL
Posts: 475
Thanks: 0
Thanked 1 Time in 1 Post
iTrader: (0)
Rep Power: 1 Freebeer187 is on a distinguished road
Default 3.8L S/C Recal. Quick question.

I read the info about the recal, and it said engine oil drips on the exaust manifold.... Well guess what, I have been smelling strong oil odors whenever i get out of my car and or pop the hood.

A few days ago, I realized that the actual engine is leaking oil! (Oh great) The car doesnt burn oil (Blue smoke out the exhaust) or run sluggish at all. I am now starting to see a small drop of oil (About the size of a dime) in the drive way when I move the vehicle.

With this being said, I would like to look into this recal, and see if I can get it done.

So my question is, to get the recal work performed, Could I go to any GM/ pontiac dealership and get the work done for free? Sad enough I dont trust the place I bought it from to get work done on the car(Check my story). How would I go about getting the work done?

Thanks!
__________________
Freebeer187 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Spurl this Post!Reddit!
Reply With Quote
Old 07-08-2008, 09:56 PM   #2
GTP Level Member
 
GTPJOE90's Avatar
 
Join Date: May 2008
Location: Outside of Mchenry IL.
Posts: 1,662
Thanks: 14
Thanked 4 Times in 4 Posts
iTrader: (0)
Rep Power: 2 GTPJOE90 is on a distinguished road
Default Re: 3.8L S/C Recal. Quick question.

well i was in the same boat as you seriously this will solve your issue.... Ok i heard about the recall and called my local GM dealer up. i said i would like the recall done on my GTP soon they said no problem. I said can i bring her in today. they said let me shedule you an appointment............ how does 3 pm sound. duh i said ok and i asked him this is all free and covered by GM correct. the awnser was yes then my jaw hit the floor and was excited haha new parts for free NICE. anyways it took about a hour and a half to get her back but she got the new gasket and DONE. so just call ur local GM dealer "you trust and go from there and shedule an appointment. Have fun and good luck man!
__________________
[SIGPIC][/SIGPIC 99 DARK BRONZEMIST METALLIC GTP SUPERCHARGED SEDAN. --MODS-- FWI, 104 plugs MSD coils and wires, 180 t-stat, dual thrush exhaust, Kenwood complete system 10' Sub ported, raised spoiler, red calis, D/S Baer rotors, Hawk Pads.
GTPJOE90 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Spurl this Post!Reddit!
Reply With Quote
Old 07-08-2008, 10:13 PM   #3
Approved Vendor
 
archemedes's Avatar
 
Join Date: Jan 2008
Location: Saraland Alabama
Posts: 3,438
Thanks: 0
Thanked 3 Times in 3 Posts
iTrader: (1)
Rep Power: 4 archemedes is on a distinguished road
Send a message via AIM to archemedes Send a message via Yahoo to archemedes
Default Re: 3.8L S/C Recal. Quick question.

most dealers don't have the parts in stock as GM wants to know the vin of the car they are going on, so it may take a couple days
__________________
Steve
'97 GTP VS cam, ZZP PCM, and not much else yet
archemedes is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Spurl this Post!Reddit!
Reply With Quote
Old 07-08-2008, 10:32 PM   #4
GXP Level Member
 
BADAZGTP's Avatar
 
Join Date: Apr 2008
Location: Athens, GA
Posts: 2,838
Thanks: 11
Thanked 11 Times in 11 Posts
iTrader: (0)
Rep Power: 3 BADAZGTP is on a distinguished road
Default Re: 3.8L S/C Recal. Quick question.

Has anyone heard anything else on whether or not you can get rembursed if you have already changed the valve cover gaskets yourself?
__________________

97 GTP~K&N Cold Air Intake~3.4" S/C Pulley~Cat Back Exhaust~MSD Blaster Coil Packs~MSD 8.5mm Wires~NGK TR55IX Plugs~More To Come
BADAZGTP is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Spurl this Post!Reddit!
Reply With Quote
Old 07-08-2008, 10:37 PM   #5
GTP Level Member
 
GTPJOE90's Avatar
 
Join Date: May 2008
Location: Outside of Mchenry IL.
Posts: 1,662
Thanks: 14
Thanked 4 Times in 4 Posts
iTrader: (0)
Rep Power: 2 GTPJOE90 is on a distinguished road
Default Re: 3.8L S/C Recal. Quick question.

arch maybe right they may have to order them. i got lucky maybe cuz i went to a huge GM dealer =]
__________________
[SIGPIC][/SIGPIC 99 DARK BRONZEMIST METALLIC GTP SUPERCHARGED SEDAN. --MODS-- FWI, 104 plugs MSD coils and wires, 180 t-stat, dual thrush exhaust, Kenwood complete system 10' Sub ported, raised spoiler, red calis, D/S Baer rotors, Hawk Pads.
GTPJOE90 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Spurl this Post!Reddit!
Reply With Quote
Old 07-08-2008, 11:18 PM   #6
GT Level Member
 
Freebeer187's Avatar
 
Join Date: Jun 2008
Location: Bartlett, IL
Posts: 475
Thanks: 0
Thanked 1 Time in 1 Post
iTrader: (0)
Rep Power: 1 Freebeer187 is on a distinguished road
Default Re: 3.8L S/C Recal. Quick question.

wait.. so its the valve gaskets?.. I Took it to a friend who is a mechanic, and he says something was replaced on it. I think he may have been talked about some new gaskets where on and he could tell they were new. Im going to take a pic of it tmw morning and post it on here. I also want to see if anyone can posisble see what may be leaking

Thanks for all the info!
__________________
Freebeer187 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Spurl this Post!Reddit!
Reply With Quote
Old 07-08-2008, 11:20 PM   #7
GTP Level Member
 
GTPJOE90's Avatar
 
Join Date: May 2008
Location: Outside of Mchenry IL.
Posts: 1,662
Thanks: 14
Thanked 4 Times in 4 Posts
iTrader: (0)
Rep Power: 2 GTPJOE90 is on a distinguished road
Default Re: 3.8L S/C Recal. Quick question.

the recall is only for the front valve cover gasket.
__________________
[SIGPIC][/SIGPIC 99 DARK BRONZEMIST METALLIC GTP SUPERCHARGED SEDAN. --MODS-- FWI, 104 plugs MSD coils and wires, 180 t-stat, dual thrush exhaust, Kenwood complete system 10' Sub ported, raised spoiler, red calis, D/S Baer rotors, Hawk Pads.
GTPJOE90 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Spurl this Post!Reddit!
Reply With Quote
Old 07-09-2008, 09:20 AM   #8
Community Vendor
 
GR8racingfool's Avatar
 
Join Date: Dec 2007
Location: Wichita, KS
Posts: 1,229
Thanks: 3
Thanked 5 Times in 2 Posts
iTrader: (6)
Rep Power: 2 GR8racingfool is on a distinguished road
Default Re: 3.8L S/C Recal. Quick question.

The recall replaced the front valve cover gasket, and redoes the front plug wires, via removing them from their factory installed plastic shield, and installing them loose, and having wire separators on them now.

Its under a recall, so yes, its free parts and labor. Just call the dealership YOU trust, and provide them your VIN # and make an appointment.

If you have already had your front valve cover gaskets replaced by yourself or a shop, GM will refund you (as much as they see justifiable on their end) in full. The GF spent almost $200.00 to have hers done, and GM only gave her back about 1/2 or 7/8 of that I believe.

I replaced mine a long time ago, and don't have a receipt for my gaskets, so screw it. Better me doing it than any dealer ship around here. Honestly, I don't trust anybody else under my hood. Especially these so called ASE certified mechanics they hire at the dealerships. They are about as skilled as the high school kids at Wal-Mart pushing carts in.

~F~
__________________
http://www.grandprixforums.net/image.php?type=sigpic&userid=44&dateline=119757648  0
GR8racingfool is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Spurl this Post!Reddit!
Reply With Quote
Old 07-09-2008, 09:30 AM   #9
GXP Level Member
 
BADAZGTP's Avatar
 
Join Date: Apr 2008
Location: Athens, GA
Posts: 2,838
Thanks: 11
Thanked 11 Times in 11 Posts
iTrader: (0)
Rep Power: 3 BADAZGTP is on a distinguished road
Default Re: 3.8L S/C Recal. Quick question.

Quote:
Originally Posted by GR8racingfool View Post
.

I replaced mine a long time ago, and don't have a receipt for my gaskets, so screw it. Better me doing it than any dealer ship around here. Honestly, I don't trust anybody else under my hood. Especially these so called ASE certified mechanics they hire at the dealerships. They are about as skilled as the high school kids at Wal-Mart pushing carts in.

~F~
Same here. Replaced mine awhile back also, just seeing if anyone had the info for anyone else that didn't know. I'd rather do all my own work too. That way if something messes up, I know it's on me and don't have to go through this long drawn out drama. Less headache.
__________________

97 GTP~K&N Cold Air Intake~3.4" S/C Pulley~Cat Back Exhaust~MSD Blaster Coil Packs~MSD 8.5mm Wires~NGK TR55IX Plugs~More To Come
BADAZGTP is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Spurl this Post!Reddit!
Reply With Quote
Old 07-09-2008, 10:32 AM   #10
Approved Vendor
 
archemedes's Avatar
 
Join Date: Jan 2008
Location: Saraland Alabama
Posts: 3,438
Thanks: 0
Thanked 3 Times in 3 Posts
iTrader: (1)
Rep Power: 4 archemedes is on a distinguished road
Send a message via AIM to archemedes Send a message via Yahoo to archemedes
Default Re: 3.8L S/C Recal. Quick question.

Quote:
Originally Posted by GTPJOE90 View Post
arch maybe right they may have to order them. i got lucky maybe cuz i went to a huge GM dealer =]
they took them from someone else. I had to go in 4 times for mine because they did that
__________________
Steve
'97 GTP VS cam, ZZP PCM, and not much else yet
archemedes is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Spurl this Post!Reddit!
Reply With Quote
Reply

  • Submit Thread to Digg Digg
  • Submit Thread to del.icio.us del.icio.us
  • Submit Thread to StumbleUpon StumbleUpon
  • Submit Thread to Google Google
  • Bookmarks

    Thread Tools
    Display Modes

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off
    Trackbacks are On
    Pingbacks are On
    Refbacks are On

    Similar Threads for: 3.8L S/C Recal. Quick question.

    Thread Thread Starter Forum Replies Last Post
    HELP! FP leak at large quick disconnect!?! alacran Tech Lounge 10 07-24-2008 01:01 PM
    Please Help Quick! 2tone bullit Tech Lounge 3 05-22-2008 07:37 AM
    quick questions mexico 3.8L V6 Naturaly Aspirated (L36)(L26) 0 04-18-2008 04:13 PM
    Quick Q: Torque Converter TommyGloves W Body 1997 to current 4 speed Automatic (4T65E) (4T65E-HD) 21 04-11-2008 07:06 AM
    Help quick evlprx Tech Lounge 2 02-24-2008 06:16 PM




    Powered by vBulletin
    Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
    SEO by vBSEO 3.2.0 ©2008, Crawlability, Inc.