Pontiac Grand Prix Forums : Grandprix

Well i read a thread on here about redoing and painting the rotors and calipers. Plus Rust = Sh1tty.... Anyways, i took 100 grit sand paper and just sanded all the rust "visible threw the wheel" away to shiny new look. Eventually i want to get some slotted and drilled perfromance rotors and some paint for my calipers. But does this look good or no? looking for some feedback and or ideas possibly? Well this thing rust up fast again??

Thanks -Joe- PS: in the pics the first pic was when i was done sanding and stuff. "looks alot better know since i sprayed all the dust and stuff off with parts cleaner.

__________________
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's

i'd hit em' with some primer and paint now!

__________________

agreed or they will be back to rusted in no time

__________________
Steve
'97 GTP VS cam, ZZP PCM, and not much else yet

what color would look good guys?? other then black?? if nothing else black will look like a shiny black =]

__________________
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's

i painted mine BBQ black rustoleum, $4.99 a can and its high heat so it wont flake. its a nice dull finish very low key.

It's going to rust again no matter what you do until you buy zinc coated rotors.

yeah thats what i think aswell iron how much is a set for zincs??

__________________
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's

go wit black or silver! only 2 colors in my mind that would actually look good!


hard color 2 go w/ any other color!

__________________

i got my rotors from r1concepts. i bought hawk pads from summit racing. the f body conversion from ZZP. came out to about $500 when it was all said and done