Spring Auto Fair at Lowes motor speedway

hester21289 · 02-09-2008, 11:01 PM

I'll probably be able to make it again this year, even if I don't have a job, which is unlikely. But I gotta get my CV axles(or whatever they are) replaced, before I'm takin a 200+ mile roadtrip

SD GTP · 02-09-2008, 11:07 PM

Quote:

Originally Posted by hester21289

I'll probably be able to make it again this year, even if I don't have a job, which is unlikely. But I gotta get my CV axles(or whatever they are) replaced, before I'm takin a 200+ mile roadtrip

are you just getting axle grease along the side of your car and under your hood or is it worse? If it's just grease here and there, it's just the boots, which aren't too bad to replace.

Best of luck in the repairs

hester21289 · 02-09-2008, 11:12 PM

Well, theres grease on the frame right under the axle, and a very small amount on the underside of the hood.

But when I go around turns and push the gas, the car has a violent shake, but only if I'm on the throttle. And it's always shaking lightly just going down the road.

Could that be the Motor or Tranny Mounts???

David99GTP · 02-09-2008, 11:13 PM

Quote:

Originally Posted by hester21289

I'll probably be able to make it again this year, even if I don't have a job, which is unlikely. But I gotta get my CV axles(or whatever they are) replaced, before I'm takin a 200+ mile roadtrip

Too bad you arent local. You know my garage is open

SD GTP · 02-09-2008, 11:18 PM

Sound like it's just the boot that is bad. It's a typical wear-n-tear issue. I just had to replace my passenger side not too long ago.

As far as your shaking problem, it could be a mount. How hard are you pushing the throttle around these turns?

hester21289 · 02-09-2008, 11:38 PM

Thanks Dave

Matt,

Just about any throttle and it starts shaking, the harder the throttle, the harder the shake.

I think I'm just gonna put new motor mounts, tranny mount, passenger cv axles. Might as well just go ahead and get all new stuff, its got 107k on it.

badgtp2000 · 02-10-2008, 08:42 AM

changing the axles isn't that bad of a job. I have replaced both mine. Like you are getting the heavy vibrations while accelerating, so was I. And it was CRAZY bad when getting onto an interstate while going around an on-ramp. If you do this yourself, remember to unplug your ABS/TCS plug on the wheel hub. I forgot.....$100 mistake, pulled the wires out of the hub, and it wasn't repairable. If you have ay questions about it, PM me.

David99GTP · 02-10-2008, 12:01 PM

Quote:

Originally Posted by hester21289

Thanks Dave

Matt,

Just about any throttle and it starts shaking, the harder the throttle, the harder the shake.

I think I'm just gonna put new motor mounts, tranny mount, passenger cv axles. Might as well just go ahead and get all new stuff, its got 107k on it.

100K mark is when a lot of things go from my experience. I have 110K and have been surprised nothing major has died. I think I have been lucky.

Injun #4 · 02-11-2008, 05:52 PM

Quote:

Originally Posted by SD GTP

I know. I'm not sure if I'm competing for Best Of Show again. I've had my turn in the Limelight. There is however a car I'd love to see take it because I know it's going to the most bad ass at the show.

Thanks for the compliment, Matt. It really means a lot.

Ok, ok, so it's not me. But a man can dream can't he?

SD GTP · 02-12-2008, 12:39 AM

how did you know i wasn't reffering to the Bleen Monster?

02-09-2008, 11:01 PM	#21
hester21289 GT Level Member Join Date: Jan 2008 Location: Monroe, GA Posts: 168 iTrader: (2) Rep Power: 1	Re: Spring Auto Fair at Lowes motor speedway I'll probably be able to make it again this year, even if I don't have a job, which is unlikely. But I gotta get my CV axles(or whatever they are) replaced, before I'm takin a 200+ mile roadtrip __________________ 2000 Grand Prix GT http://www.cardomain.com/ride/2776530

02-09-2008, 11:12 PM	#23
hester21289 GT Level Member Join Date: Jan 2008 Location: Monroe, GA Posts: 168 iTrader: (2) Rep Power: 1	Re: Spring Auto Fair at Lowes motor speedway Well, theres grease on the frame right under the axle, and a very small amount on the underside of the hood. But when I go around turns and push the gas, the car has a violent shake, but only if I'm on the throttle. And it's always shaking lightly just going down the road. Could that be the Motor or Tranny Mounts??? __________________ 2000 Grand Prix GT http://www.cardomain.com/ride/2776530

02-09-2008, 11:18 PM	#25
SD GTP GT Level Member Join Date: Dec 2007 Location: Kirkwood, Delaware Posts: 430 iTrader: (1) Rep Power: 1	Re: Spring Auto Fair at Lowes motor speedway Sound like it's just the boot that is bad. It's a typical wear-n-tear issue. I just had to replace my passenger side not too long ago. As far as your shaking problem, it could be a mount. How hard are you pushing the throttle around these turns? __________________ MACGP President 3.25"/P&P Gen III/ZZP Stg II TB/Thasher CAI/ZZP VS Cam/TOG Xtremes/AL 104s/180*/Full 3" Exhaust/SD Package/GMPP Sways & Arms/DuBob'd

02-09-2008, 11:38 PM	#26
hester21289 GT Level Member Join Date: Jan 2008 Location: Monroe, GA Posts: 168 iTrader: (2) Rep Power: 1	Re: Spring Auto Fair at Lowes motor speedway Thanks Dave Matt, Just about any throttle and it starts shaking, the harder the throttle, the harder the shake. I think I'm just gonna put new motor mounts, tranny mount, passenger cv axles. Might as well just go ahead and get all new stuff, its got 107k on it. __________________ 2000 Grand Prix GT http://www.cardomain.com/ride/2776530

02-10-2008, 08:42 AM	#27
badgtp2000 SE Level Member Join Date: Feb 2008 Location: Canton, NC Posts: 32 iTrader: (0) Rep Power: 0	Re: Spring Auto Fair at Lowes motor speedway changing the axles isn't that bad of a job. I have replaced both mine. Like you are getting the heavy vibrations while accelerating, so was I. And it was CRAZY bad when getting onto an interstate while going around an on-ramp. If you do this yourself, remember to unplug your ABS/TCS plug on the wheel hub. I forgot.....$100 mistake, pulled the wires out of the hub, and it wasn't repairable. If you have ay questions about it, PM me.

02-12-2008, 12:39 AM	#30
SD GTP GT Level Member Join Date: Dec 2007 Location: Kirkwood, Delaware Posts: 430 iTrader: (1) Rep Power: 1	Re: Spring Auto Fair at Lowes motor speedway how did you know i wasn't reffering to the Bleen Monster? __________________ MACGP President 3.25"/P&P Gen III/ZZP Stg II TB/Thasher CAI/ZZP VS Cam/TOG Xtremes/AL 104s/180*/Full 3" Exhaust/SD Package/GMPP Sways & Arms/DuBob'd

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads for: Spring Auto Fair at Lowes motor speedway
Thread	Thread Starter	Forum	Replies	Last Post
Valve Spring replacement...	Iron Indian	3.8L V6 Naturaly Aspirated (L36)(L26)	8	02-01-2008 06:30 PM
Question worth it to buy? 1998 z24 auto convertibe	fst	The Lounge	5	01-31-2008 02:12 PM
Detroit Auto Show 2008	Trannyman95	The Lounge	14	01-25-2008 11:27 PM
A & W Auto	phat_ridegt	Community Vendors	6	01-23-2008 05:14 PM
LF/WTB:spring retainers and valve seals for 105# springs	fst	Wanted Items	0	01-08-2008 06:53 AM

Spring Auto Fair at Lowes motor speedway

Spring Auto Fair at Lowes motor speedway

Similar Threads for: Spring Auto Fair at Lowes motor speedway