Hey everyone.
I saw a grand prix on the weekend with the inside pieces of the tail lights removed so you can see the bulbs inside. I thought it looked pretty good. I found a pic of one car on this site that had done the same. Does anyone have any info or tips on doing this? I did it with a spare set of lights I had from my sunbird a year or two ago, but don't want to risk breaking my gp ones since I have no back-ups. Any info or tips would be appreciated.
Thanks!
Josh

I think your referring to the clear lights with the chrome on the inside, if so here's a link to some on eBay.

eBay Motors: 97-03 PONTIAC GRAND PRIX CARBON ALTEZZA EURO TAIL LIGHT (item 280265502786 end time Sep-16-08 17:53:57 PDT)

eBay Motors: 97-03 PONTIAC GRAND PRIX CHROME ALTEZZA EURO TAIL LIGHT (item 310082755538 end time Sep-17-08 18:26:13 PDT)

If not please clarify what your looking for please .

Nah, sounds like he's asking about the clear stock tail light mod.


Let me see if I can find the write-up for you real quick.

__________________

2.8 Pulley, Intense IC, P&P Gen V, Machined Intake, Intense PCM, 65lb/hr Injectors, N* Throttle Body, 1 3/4" Headers, 3" Exhaust, Intense Shift Kit, 3.69:1 Gears, 4000 Stall, N20

Here is a good page to check out.

ClubGP Message Forum- Clear Tail Light Mod Information

__________________

2.8 Pulley, Intense IC, P&P Gen V, Machined Intake, Intense PCM, 65lb/hr Injectors, N* Throttle Body, 1 3/4" Headers, 3" Exhaust, Intense Shift Kit, 3.69:1 Gears, 4000 Stall, N20

i think i may try this over winter. the only thing that concerns me is hyperflash. i dont even know what that is...i assume it goes crazy when you hit the brakes? i read somewhere you need a resistor of some sort

No, hyper flash is just when you use your turn signal it'll blink quicker than it's suppose too.

__________________

2.8 Pulley, Intense IC, P&P Gen V, Machined Intake, Intense PCM, 65lb/hr Injectors, N* Throttle Body, 1 3/4" Headers, 3" Exhaust, Intense Shift Kit, 3.69:1 Gears, 4000 Stall, N20

On my sunbird I just heated the tails up and then pulled the lenses apart from the backing and then removed the inner pieces. I figured this would be done the same way instead of needing a dremel and cutting it apart. I think I will have to get a spare set and try iy out on those incase something doesn't work out well, haha. Thanks!

Are you talkin about my style? The red inserts are just taken out.

^hmm........


how is the light output on those? seems like it'd blind the person behind u!

__________________

Its fine, got pulled over by a dick cop for having them like that but no problems since.