hey i was wondering if anyone knows an easy way to install the after market chrome grills you get from pfyc.com for an 03...i read that the 03's have this air dam that blocks the way and i dont want to have to take off the front bumper...i heard it can be done, but i am not sure how they did it...i want to get mine on asap but i need some much needed advice... thanks

__________________
http://www.cardomain.com/ride/2556536 NKG Iridium Plugs, 8mm Spiro Wires, ZZP Reprogrammed PCM, ZZP 3" full cat, ZZP Ceramic Coated Ported Manifolds, ZZP HV3, ZZP HVTB, ZZP ER Ratio Rocker Arms, ZZP Drilled 180* Thermostat, MotorSports Performance Intake, Reptile's IAT and dezldave tuned

You should just be able to take off some of the plastic shrouding between the bumper and the radiator. Look for the little plastic screw like clips (IIRC some really are screws, some aren't), then pull and cuss until you find the one you missed.

Or just do what I did. I figured I'd save myself the time of removing the plastic, so I just bent it out of the way and reached in. An hour and a lot of scratches later I gave up and removed it.

I know it was fun fitting my big arm in the little room I had to work with to put mine, several cuss words and gouges to my arm and hands later I was successful. This was on my 04 so I don't know if it is different for you. I won't post the way I did it unless noone helps you that has a 97-03 in a couple of days, that way I don't waste your time posting how to do it on an 04.

__________________
Steven Oliver
2004 GTP comp-g WS6. Gator and suede all around interior.
Advanced MECP certified installer, custom upholsterer.

Bent coat hanger, thin needle nose pliars, and a hell of a lot of patience. Buy longer zip strips and then use a pencil razor to cut afterwards.

__________________
debadged, clear corners, 20% tint, tinted tails, vibrant performance tips, red painted calipers, Fig. grills, autometer guages, PFYC 3 pod A pillar, SLP CAI, 2.5" DP, SD Hood, SD front air damn, Gen I spoiler, 17X8 Borbet Type M rims, engine upgrades soon!
My Cardomain

If your are good you can set the grills in and snake the zip ties through the bumper and back out the grills. That is sort of how I did it, I have a 99 so I could somewhat get my hand behind to help with the snaking.

__________________
Red 2dr 99 GTP: Z7 t66, A/A IC'd, Custom Heads, 65# Inj, ST2 Cam, Meziere Elec Pump, JP Double Roller(with machined crank gear), Plogs, PLX W/B, Powrtuner

99 Regal GS (work car)