Do i have to buy SS lines to fit the F body brakes to my 97 or can I just reuse the stock rubber lines for now?
This is a discussion on F-body brake ? within the Brakes/Suspension/Chassis forums, part of the W Body Tech category; Do i have to buy SS lines to fit the F body brakes to my 97 or can I just ...
Do i have to buy SS lines to fit the F body brakes to my 97 or can I just reuse the stock rubber lines for now?
I'd replace the lines now.. You'd be an idiot not to
being you have a car over 10 years old, i'd change them, either f body rubber lines or the SS lines.
98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails and a bone stock engine. http://www.grandprixforums.net/scott...-gs-47574.html
I did the ss lines and haven't looked back. They are awesome
Sent from my Droid
2000 GTP - Stage 3 Heads - Gen V - 48# Injectors - Hardened Pushrods - Comp Limited Travel Lifters - LS6 Springs - Yella Terra 1.9 Rockers - S3 Phenolic Intercooler - N* TB - SD Headers - SR intake - ZZP 3.1 Pulley - Dyno Tune - Built 4T65E-HD - 12" Brake kit - SS brake lines - KYB GR2 Struts - 333WHP - 386WTQ
The hoses are 1 yr old. Dont want to spend $100 on hoses if the stock ones will fit. So do i use the regal hoses or the camaro hoses?
i dont think the stock w body line will fit the banjo bolt for the f body caliper.
98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails and a bone stock engine. http://www.grandprixforums.net/scott...-gs-47574.html
You can use the stock hoses. Bend the retainer bracket that bolts to the inner fender well down a smidge and it'll work.
What rotors do you use with F-body calipers?
Just the 12" rotors off the 04+ GP I believe. Correct me if im wrong.
Sent from my Droid
2000 GTP - Stage 3 Heads - Gen V - 48# Injectors - Hardened Pushrods - Comp Limited Travel Lifters - LS6 Springs - Yella Terra 1.9 Rockers - S3 Phenolic Intercooler - N* TB - SD Headers - SR intake - ZZP 3.1 Pulley - Dyno Tune - Built 4T65E-HD - 12" Brake kit - SS brake lines - KYB GR2 Struts - 333WHP - 386WTQ
Fbody rotors, impala rotors (larger option), I'm pretty sure the 04+ are the same
I ordered F-body rotor/pad combo off of ebay for cheap. reused stock lines with new brass crush washers. everything works great
1999 GTP Coupe ------ Comp Cam 76-802-9, 2.7" pulley, S2IC, N*, FWI, SD Headers, DHP Tune, Built trans (single 3.29s, 300m), Magnaflow Catback, 60#injectors, E85, MT ET Street DR's, Fbody brakes, PRJ pump/rails. 302whp/328ft-lbs.......12.41@110mph
Not 04+. Theyre too small.
ok they are 11.69 compared to the 11.93 of the others...small enough for me i guess lol
So don't use brackets for 11.9x rotors with rotors that are 11.6x.
Bookmarks