does the 4t65e hd really take 7.4 quarts when just draining the pan and changing filter?
its what AllDATA shows, but that seems excessive to me.
This is a discussion on Drain and refill amount within the 1997 to current 4 speed Automatic (4T65E) (4T65E-HD) forums, part of the Transmissions category; does the 4t65e hd really take 7.4 quarts when just draining the pan and changing filter? its what AllDATA shows, ...
does the 4t65e hd really take 7.4 quarts when just draining the pan and changing filter?
its what AllDATA shows, but that seems excessive to me.
97 GTP: Ported Gen III/NIC Cam/SD Headers/3.25" Pulley/ZZP Canned Tune/SLP Loudmouth/Racetronix Fuel Pump/Racetronix Pump Hotwire Kit/Lucas 42.5# Injectors/Poly Square Mounts
Yup, its roughly around that. I usually put in 6 quarts check it. Then add keep adding and checking until the level is right.
98 GTP-Mods? Yeah, lots of them
01 Regal GS- DD,but it looks good
I had about 8 when I did my shift kit.
98 GTP 230K miles scrapped
04 Comp G 180*, HAI, poly db's, zzp stb's, UMI ta's, Speedbuilt sways, DNA springs budget build in the works
dexron 3 is cheap anyway.
Dont buy dexron 6 if you are 04 and older.
SMGPFC Member #1
Most of the specs say it takes 6 quarts. I tell people to buy two of the gallon jugs. It'll take 7-7.5 quarts.
If Dave feels 60% throttle is 100%, what does he tell his wife.
right its "compatible"
But I just prefer to use what came in the trans from the factory, instead of upgrading to the more synthetic blend that dexron 6 is.
I just hit up napa and dexron 3 is always around 2 bucks cheapers per quart, so thats why I run it.
SMGPFC Member #1
Bookmarks