Ok let's get started!
Rocafella sent me his winning 10000K LED Fog Lights for me to review.
Here is what he sent me:
Here are the Positive and Negative wires (Red being Positive and Black being Negative):
My brother's front end with stock fog lights:
Lights on:
This is the back of the LED Fog Lights.. We scratched out heads and wondered how to mount these for the longest time and could not think of a way:
We proceeded to take apart the driver side fog light:
There are two bolts you need to take off. They are 10mm. It's pretty tight in there (that's what she said)
The Harness with the bulb connected:
Just the Harness:
You will need to CUT the part where it used to connect to your old fog light bulbs. You will see a black and purple wire.
The Black wire is the NEGATIVE so connect that to the BLACK WIRE from the LED Fog Lights.
The Purple wire is the POSITIVE so connect that to the RED WIRE from the LED Fog Lights.
Just like this:
Ok now mounting them:
We had no idea how to mount them using the stock mounting brackets because there was literally no way too... I don't know if we missed something but we couldn't think of a way..
What we ended up doing is two way taping them. I recommend buying some heavy duty 3m two way tape because what is included in the kit did not do a good job of staying put.
Here is where we put the tape:
We also (for safety and stronger bond) put two way tape on the backs of the LED Fog Lights:
Then we just peeled the tape and put them in. They sit pretty far back. After you hook them up they will work with your fog light switch perfectly.
Here are some pics of them on the car:
You can see the gap from them sitting so far back.
They do output some light:
![]()


LinkBack URL
About LinkBacks





)















Reply With Quote

Bookmarks