So, I got a really sweet deal on trade in for the Grand Prix. I bought a ranger with a v6, 5spd, and it has 25k miles on it. It is in need of something to protect the bed. I have thought about drop-ins, roll-ons, and spray-ins. Here is where it gets interesting. The previous owner took it upon themselves to use the aerosol bed liner on the bottom of the bed. They didn't prep it very well it and it is peeling near the cab. The stuff is very thin and feels like it would come off very easy but obviously it would take some work. I took a pressure wash(1300psi) and it didn't phase it so I assume that it would take some elbow grease to get it off. There is also over spray on the sides of the bed up about 4 inches on all the sides and they also did the
If I have a spray-in done they will either let me take the stuff off or they will for 50 dollars and hour extra on top of the 425 they quoted me for the job. I had also thought about the drop-in since the bottom is already coated somewhat. The drop-in will not have much effect on that stuff since it is harder than paint. Then there is the roll-on stuff such as Herculiner. I amthinking about doing this as well but i wonder if the other stuff will have to be completely gone before I would be able to apply it and be sure the stuff would not flake off or peel.
So, what do you guys think?