 Re: Official 4t65e-HD Rebuild
The valves in the first pic look fine as far as how they are lined up. The plug with the blue oring needs to have the oring side go in first. The two plugs you showed are the same but with the oring on wrong on one of them, just make sure the plug is flush and the clip that retains it fits ok. Also make sure you replace the oring as the blue one can cause problems as they age. On your 4th accumulator setup the pin does go through the top side of the channel plate. Make sure you put the springs and piston into the 4th accumulator housing before you put them in the channel plate. |