Grand Prix Forums (Grandprixforums.net) - View Single Post - Eddie's table modifier, my table too big?

Zef_66 · 06-06-2008, 04:23 PM

I would suggest just reading the bin file and letting the program do the work of extracting the VE table. After you have loaded your scan data, under the file menu, select read bin file. Then find the bin file that was used to make the scan and the program will load it in. It will pull the MAF, VE, and timing tables automagically.

Try that and see if it works.

06-06-2008, 04:23 PM	#2
Zef_66 GTP Level Member Join Date: Dec 2007 Location: Middleburg, PA Posts: 1,045 Thanks: 0 Thanked 11 Times in 11 Posts iTrader: (0)	Re: Eddie's table modifier, my table too big? I would suggest just reading the bin file and letting the program do the work of extracting the VE table. After you have loaded your scan data, under the file menu, select read bin file. Then find the bin file that was used to make the scan and the program will load it in. It will pull the MAF, VE, and timing tables automagically. Try that and see if it works. __________________ 1997 GTP - 200k+ miles, PEMs, 3" SS Exhaust w/ Borla Mufflers, 3.4", 180* stat(summer), FWI, 1.84 RR, PT, SLP hood, KYB GR2s, GMPP Handling Kit, etc...

Thread: Eddie's table modifier, my table too big? View Single Post

Thread: Eddie's table modifier, my table too big?
View Single Post